JIS B1059-2001

VIP免费
阿拉丁 2024-09-15 11 426.03KB 10 页 14星币
侵权投诉
J
IS
JAPANESE
INDUSTRIAL
STANDARD
Translated and Published
by
Japanese Standards
Association
(IS0
10666
:
1999)
(JFRI/
JSA)
Drilling screws with tapping screw
t hread-Mechanical and functional
properties
ICs
21.060.10
Reference
number
:
JIS
B
1059
:
2001
(E)
6s
PROTECTED BY COPYRIGHT
B
1059
:
2001 (IS0
10666
:
1999)
Foreword
This translation has been made based
on
the original Japanese Industrial
Standard established by the Minister of Economy, Trade and Industry
through deliberations
at
the Japanese Industrial Standards Committee
according to the proposal of establishing a Japanese Industrial Standard
from The Japan Research Institute
for
Screw Threads and Fasteners
(JFRI)/the Japanese Standards Association (JSA), with a draft
of
Industrial Standard based on the provision
of
Article 12 Clause
1
of the
Industrial Standardization Law.
This Standard has been made based on
IS0
10666
:
1999
DriZZing screws
with tapping screw thread-Mechanical and functional properties
for the
purposes
of
making easy
to
compare this Standard with International
Standard;
to
prepare Japanese Industrial Standard conforming with
International Standard; and
to
propose a draft of International Standard
which
is
based on Japanese Industrial Standard.
Attention is drawn
to
the possibility that some parts
of
this Standard
may conflict with a patent right, application for a patent after opening
to
the public, utility model right
or
application for registration
of
utility
model after opening
to
the public which have technical properties. The
relevant Minister and the Japanese Industrial Standards Committee
are not responsible for identifying the patent right, application
for
a
patent after opening to the public, utility model right
or
application for
registration
of
utility model after opening to the public which have the
said technical properties.
Date of Establishment: 2001-12-20
Date
of
Public Notice in Official Gazette: 2001-12-20
Investigated by: Japanese Industrial Standards Committee
Standards Board
Technical Committee on Machine Elements
JIS
B
1059
:
2001,
First English edition published in
2002-07
Translated and published by: Japanese Standards Association
4-1-24,
Akasaka, Minato-ku,
Tokyo,
107-8440
JAPAN
In the event
of
any doubts arising as
to
the contents,
the original JIS is to be the final authority.
8
JSA
2002
All rights reserved. Unless otherwise specified, no part
of
this publication may be reproduced or
utilized
in
any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing
from
the publisher.
Printed in Japan
PROTECTED BY COPYRIGHT
JAPANESE INDUSTRIAL
STANDARD
JIS
B
1059
:
2001
(IS0
10666
:
1999)
Drilling screws with tapping
screw thread-Mechanical and
functional properties
Introduction
This Japanese Industrial Standard has been prepared based on the
first edition
of
IS0
10666
Drilling screws with tapping screw thread-Mechunical
and functional properties
published in
1999
without modifying the technical contents.
1
Scope
This Standard specifies the properties
of
heat treated screws with a tap-
ping screw thread in accordance with
JIS
B
1007,
and which are designed with a
drilling point which. automatically drills the core hole for the screw during assem-
bly. Such screws then automatically form the mating screw thread, either in a non-
cutting or in a cutting operation, with the aid
of
the threaded portion of the screw
adjoining the drilling point.
The purpose
of
this Standard is
to
ensure that the screws are able
to
drill their
core hole and form their mating screw thread without becoming distorted or fractur-
ing in the process, provided that no overstressing has occurred. Consequently the
following characteristics are regarded as representing the most important aspects
for the assessment
of
the mechanical and operational characteristics of a drilling
screw:
-
surface hardness;
-
capability of core hole drilling and forming of the mating female screw thread;
-
torsional strength.
Remarks
:
The International Standard corresponding
to
this Standard
is
as fol-
lows.
In addition, symbols which denote the degree of correspondence in
the contents between the relevant International Standard and
JIS
are IDT (identical),
MOD
(modified), and
NEQ
(not equivalent)
ac-
cording
to
ISO/IEC Guide 21.
IS0
10666
:
1999 Drilling screws with tapping screw thread-Me-
chanical and functional properties
(IDT)
2
Normative
reference
The following standards contain provisions which, through
reference in this Standard, constitute provisions of this Standard. The most recent
editions
of
the standards (including amendments) shall be applied.
JIS
B
1007 Threads and thread ends
for
tapping screws
Remarks
:
The items cited from
IS0
1478
:
1983 Tapping screws thread
are
equivalent
to
the corresponding matters
of
the said standard.
JIS
B
1044
Fasteners-Electroplated coatings
IS0
4042
:
1999 Fasteners-Electroplated coatings
is
identical with
the said standard.
Remarks
:
PROTECTED BY COPYRIGHT
摘要：

JIS B1059-2001 是日本工业标准（JIS）中关于“螺纹紧固件的机械性能——不锈钢螺栓、螺钉和螺柱”的技术规范。该标准详细规定了不锈钢材质紧固件的强度等级、材料特性、硬度要求、拉伸性能及标记方法，适用于采用奥氏体、马氏体和铁素体不锈钢制造的螺栓、螺钉和螺柱。作为替代旧版JIS B1059-1985的重要标准，它在机械制造、汽车工业、建筑结构及海洋工程等对耐腐蚀性能要求较高的领域中被广泛引用。理解JIS B1059-2001有助于确保不锈钢紧固件在高温、潮湿或腐蚀性环境中的可靠性与一致性

展开>> 收起<<
JIS B1059-2001.pdf

共10页,预览4页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：阿拉丁 分类：国际标准 价格：14星币 属性：10 页 大小：426.03KB 格式：PDF 时间：2024-09-15

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 10
评分 收藏
分享
立即下载 VIP免费下载
客服
关注