PIP PNSMV025-2018

VIP专免
Carl 2024-09-16 8 791.69KB 64 页 18星币
侵权投诉
TECHNICAL CORRECTION
February 2018
Piping
PIP PNSMV025
Stainless Steel
Check Valve Descriptions
PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
In an effort to minimize the cost of process industry facilities, this Practice has been
prepared from the technical requirements in the existing standards of major industrial users,
contractors, or standards organizations. By harmonizing these technical requirements into a single
set of Practices, administrative, application, and engineering costs to both the purchaser and the
manufacturer should be reduced. While this Practice is expected to incorporate the majority of
requirements of most users, individual applications may involve requirements that will be appended
to and take precedence over this Practice. Determinations concerning fitness for purpose and
particular matters or application of the Practice to particular project or engineering situations should
not be made solely on information contained in these materials. The use of trade names from time
to time should not be viewed as an expression of preference but rather recognized as normal usage
in the trade. Other brands having the same specifications are equally correct and may be substituted
for those named. All Practices or guidelines are intended to be consistent with applicable laws and
regulations including OSHA requirements. To the extent these Practices or guidelines should
conflict with OSHA or other applicable laws or regulations, such laws or regulations must be
followed. Consult an appropriate professional before applying or acting on any material contained
in or suggested by the Practice.
This Practice is subject to revision at any time.
© Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at
Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies and
Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not
permitted within any PIP Practice without the express written authorization of PIP. Authorized Users
may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of
PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the
Practice solely for Authorized Users’ purposes. These purposes include but are not limited to the
procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for
proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific
project by Authorized User’s client. PIP’s copyright notices must be clearly indicated and
unequivocally incorporated in documents where an Authorized User desires to provide any third party
with copies of the Practice.
PRINTING HISTORY
October 1995
Issued
May 2000
Revision
April 2003
Technical Revision
March 2010
Complete Revision
February 1997
Revision
July 2000
Revision
November 2003
Technical Revision
August 2012
Technical Revision
June 1998
Revision
October 2000
Revision
November 2005
Technical Revision
May 2014
Technical Correction
February 1999
Complete Revision
May 2001
Revision
June 2006
Technical Revision
August 2016
Complete Revision
December 1999
Revision
Sept 2002
Revision
Sept 2007
Technical Correction
February 2018
Technical Correction
January 2000
Revision
February
2003
Technical
Revision
Nov 2009
Technical Revision
Not printed with State funds
TECHNICAL CORRECTION
February 2018
Piping
Process Industry Practices Page 1 of 62
PIP PNSMV025
Stainless Steel
Check Valve Descriptions
Table of Contents
1. Introduction ................................. 2
1.1 Purpose .......... Error! Bookmark not
defined.
1.2 ScopeError! Bookmark not defined.
2. References .................................. 2
2.1 Process Industry Practices ............... 2
3. Valve Designation System ......... 2
4. Notes ............................................ 2
5. Cross Reference ......................... 3
6. Valve Descriptions ...................... 6
摘要：

PIP PNSMV025-2018 是工艺工业管道协会（PIP）发布的一项关于管道应力分析的标准规范，全称为“PIP PNSMV025-2018 Piping Stress Analysis Design Guide”。该标准旨在为石油、化工、电力等工业领域的管道系统提供应力分析的设计指南，涵盖载荷计算、柔性评估、支撑设计及疲劳分析等关键环节，确保管道在高温、高压及复杂工况下的安全性与可靠性。文档适用于工程师、设计师及项目管理人员，作为参考依据以优化管道布局、降低风险并符合行业合规要求。其内容基

展开>> 收起<<
PIP PNSMV025-2018.pdf

共64页,预览4页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：Carl 分类：国外协会 价格：18星币 属性：64 页 大小：791.69KB 格式：PDF 时间：2024-09-16

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 64
评分 收藏
分享
立即下载 VIP免费下载
客服
关注