PIP RESM003-2018

VIP专享

Carl 2024-09-16 60 1.63MB 40 页 18星币

侵权投诉

TECHNICAL REVISION

September 2018

Machinery

PIP RESM003

Specification for Mixers and Agitators

PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES

In an effort to minimize the cost of process industry facilities, this Practice has been

prepared from the technical requirements in the existing standards of major industrial users,

contractors, or standards organizations. By harmonizing these technical requirements into a

single set of Practices, administrative, application, and engineering costs to both the

purchaser and the manufacturer should be reduced. While this Practice is expected to

incorporate the majority of requirements of most users, individual applications may involve

requirements that will be appended to and take precedence over this Practice. Determinations

concerning fitness for purpose and particular matters or application of the Practice to

particular project or engineering situations should not be made solely on information

contained in these materials. The use of trade names from time to time should not be viewed

as an expression of preference but rather recognized as normal usage in the trade. Other

brands having the same specifications are equally correct and may be substituted for those

named. All Practices or guidelines are intended to be consistent with applicable laws and

regulations including OSHA requirements. To the extent these Practices or guidelines should

conflict with OSHA or other applicable laws or regulations, such laws or regulations must be

followed. Consult an appropriate professional before applying or acting on any material

contained in or suggested by the Practice.

This Practice is subject to revision at any time.

Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies and

Subscribers may copy this Practice for their internal use. Changes or modifications of any kind

are not permitted within any PIP Practice without the express written authorization of PIP.

Authorized Users may attach addenda or overlays to clearly indicate modifications or

exceptions to specific sections of PIP Practices. Authorized Users may provide their clients,

suppliers and contractors with copies of the Practice solely for Authorized Users’ purposes.

These purposes include but are not limited to the procurement process (e.g., as attachments to

requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and

issue of design engineering deliverables for use on a specific project by Authorized User’s

client. PIP’s copyright notices must be clearly indicated and unequivocally incorporated in

documents where an Authorized User desires to provide any third party with copies of the

Practice.

PRINTING HISTORY

April 1999

Issued as RESM001 & RESM002

September 2018

Technical Revision

September 2013

Complete Revision & Renumbering

Not printed with State funds

TECHNICAL REVISION

September 2018

Machinery

Process Industry Practices Page 1 of 17

PIP RESM003

Specification for Mixers and Agitators

Table of Contents

1. Introduction ................................. 2

1.1 Purpose ............................................ 2

1.2 Scope ............................................... 2

2. References .................................. 2

2.1 Process Industry Practices ............... 2

2.2 Industry Codes and Standards ......... 2

3. Definitions ................................... 3

4. Requirements .............................. 3

4.1 Quotation .......................................... 3

4.2 General ............................................. 4

4.3 Installation and Maintenance ............ 5

4.4 Materials ........................................... 5

4.5 Mixer and Agitator Assemblies ......... 6

4.6 Shaft Sealing Systems ..................... 8

4.7 Agitator Supports ............................ 10

4.8 Shaft Couplings and Guards .......... 10

4.9 Speed Reducers ............................. 11

4.10 Drive Motors ................................... 14

4.11 Auxiliary Piping ............................... 14

4.12 Inspection and Testing ................... 14

4.13 Preparation for Shipment ............... 15

4.14 Documentation ............................... 17

Data Forms

RESM003-D – Mixers and Agitators Data Sheet

(US Customary Units)

RESM003-DM – Mixers and Agitators Data

Sheet (Metric Units)

RESM003-R – Documentation Requirements

Sheet

RESM003-T – Inspection and Testing

Requirements Sheet

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载

摘要：

PIP RESM003-2018 是由美国石油学会（API）等组织联合发布的能源管理标准规范，专注于指导石油、化工及天然气行业在工厂运行与设备维护中实现高效能源利用。该文档于2018年更新，旨在通过标准化流程降低能源消耗、减少碳排放并提升运营经济性，适用于新建项目改造及现有设施优化。内容涵盖能源基准设定、绩效指标监控、审计方法及持续改进框架，帮助企业合规并应对国际能源政策挑战。其核心价值在于为高能耗工业提供可操作的技术指南，助力实现碳中和目标与可持续竞争力。

展开>> 收起<<

PIP RESM003-2018.pdf

共40页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

PIP RESM003-2018

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: