BS EN 10088-3-2023

VIP专免
阿拉丁 2024-09-16 61 1.52MB 98 页 16星币
侵权投诉
BSI Standards Publication
Stainless steels


BS EN 10088‑3:2023
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 10088-3
December 2023
ICS 77.140.20; 77.140.50; 77.140.65 Supersedes EN 10088-3:2014
English Version
Stainless steels - Part 3: Technical delivery conditions for
semi-finished products, bars, rods, wire, sections and
bright products of corrosion resistant steels for general
purposes
Aciers inoxydables - Partie 3 : Conditions techniques de
livraison pour les demi-produits, barres, fils, fils
tréfilés, profils et produits transformés à froid en acier
résistant à la corrosion pour usage général
Nichtrostende Stähle - Teil 3: Technische
Lieferbedingungen für Halbzeug, Stäbe, Walzdraht,
gezogenen Draht, Profile und Blankstahlerzeugnisse
aus korrosionsbeständigen Stählen für allgemeine
Verwendung
This European Standard was approved by CEN on 6 November 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 10088-3:2023 E
National foreword
This British Standard is the UK implementation of EN 10088‑3:2023. It
supersedes BS EN 10088‑3:2014, which is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee ISE/105, Steels for Heat Treatment, Alloy Steels, Free‑Cutting
Steels and Stainless Steels.
A list of organizations represented on this committee can be obtained on
request to its committee manager.
Contractual and legal considerations
This publication has been prepared in good faith, however no
representation, warranty, assurance or undertaking (express or
implied) is or will be made, and no responsibility or liability is or will be
accepted by BSI in relation to the adequacy, accuracy, completeness or
reasonableness of this publication. All and any such responsibility and
liability is expressly disclaimed to the full extent permitted by the law.
This publication is provided as is, and is to be used at the
recipient’s own risk.
The recipient is advised to consider seeking professional guidance with
respect to its use of this publication.
This publication is not intended to constitute a contract. Users are
responsible for its correct application.
© The British Standards Institution 2024
Published by BSI Standards Limited 2024
ISBN 978 0 539 17015 3
ICS 77.140. 20; 77.14 0.50; 77.140.65
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 January 2024.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN 10088‑3:2023
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 10088-3
December 2023
ICS 77.140.20; 77.140.50; 77.140.65 Supersedes EN 10088-3:2014
English Version
Stainless steels - Part 3: Technical delivery conditions for
semi-finished products, bars, rods, wire, sections and
bright products of corrosion resistant steels for general
purposes
Aciers inoxydables - Partie 3 : Conditions techniques de
livraison pour les demi-produits, barres, fils, fils
tréfilés, profils et produits transformés à froid en acier
résistant à la corrosion pour usage général
Nichtrostende Stähle - Teil 3: Technische
Lieferbedingungen für Halbzeug, Stäbe, Walzdraht,
gezogenen Draht, Profile und Blankstahlerzeugnisse
aus korrosionsbeständigen Stählen für allgemeine
Verwendung
This European Standard was approved by CEN on 6 November 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 10088-3:2023 E
BS EN 10088‑3:2023
摘要：

BS EN 10088-3-2023 是欧洲标准化委员会发布的最新版不锈钢技术交货条件标准，覆盖了半成品、棒材、线材、型材和光亮产品的技术要求、尺寸公差、表面状态及机械性能。该标准主要针对耐腐蚀不锈钢，适用于工程、建筑、汽车及食品加工等行业选材与质量验收。2023版在前一版基础上更新了耐热钢韧性指标、细化表面分类，并删除了部分过渡牌号。实施该标准有助于确保不锈钢制品符合欧盟市场要求，提升产品的一致性与可追溯性。制造商、采购商及检验机构应关注牌号对照、热处理状态、硬度范围及尺寸偏差等关键参数，以优

展开>> 收起<<
BS EN 10088-3-2023.pdf

共98页,预览4页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：阿拉丁 分类：国际标准 价格：16星币 属性：98 页 大小：1.52MB 格式：PDF 时间：2024-09-16

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 98
评分 收藏
分享
立即下载 VIP免费下载
客服
关注