BS EN 10250-4-2021

VIP免费
阿拉丁 2024-09-16 44 669.26KB 26 页 16星币
侵权投诉
BSI Standards Publication
Open die steel forgings for general
engineering purposes
Part 4: Stainless steels
BS EN 10250‑4:2021
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 10250-4
May 2021
ICS 77.140.20; 77.140.85 Supersedes EN 10250-4:1999
English Version
Open die steel forgings for general engineering purposes -
Part 4: Stainless steels
Pièces forgées en acier pour usage général - Partie 4 :
Aciers inoxydables
Freiformschmiedestücke aus Stahl für allgemeine
Verwendung - Teil 4: Nichtrostende Stähle
This European Standard was approved by CEN on 12 April 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 10250-4:2021 E
National foreword
This British Standard is the UK implementation of EN 10250‑4:2021. It
supersedes BS EN 10250‑4:2000, which is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee ISE/111, Steel Castings and Forgings.
A list of organizations represented on this committee can be obtained on
request to its committee manager.
Contractual and legal considerations
This publication has been prepared in good faith, however no
representation, warranty, assurance or undertaking (express or
implied) is or will be made, and no responsibility or liability is or will be
accepted by BSI in relation to the adequacy, accuracy, completeness or
reasonableness of this publication. All and any such responsibility and
liability is expressly disclaimed to the full extent permitted by the law.
This publication is provided as is, and is to be used at the
recipient’s own risk.
The recipient is advised to consider seeking professional guidance with
respect to its use of this publication.
This publication is not intended to constitute a contract. Users are
responsible for its correct application.
© The British Standards Institution 2021
Published by BSI Standards Limited 2021
ISBN 978 0 539 00391 8
ICS 77.14 0. 20; 77.140. 85
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 May 2021.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN 10250‑4:2021
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 10250-4
May 2021
ICS 77.140.20; 77.140.85 Supersedes EN 10250-4:1999
English Version
Open die steel forgings for general engineering purposes -
Part 4: Stainless steels
Pièces forgées en acier pour usage général - Partie 4 :
Aciers inoxydables
Freiformschmiedestücke aus Stahl für allgemeine
Verwendung - Teil 4: Nichtrostende Stähle
This European Standard was approved by CEN on 12 April 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 10250-4:2021 E
BS EN 10250‑4:2021
摘要：

BS EN 10250-4-2021 是英国标准化机构（BSI）发布的最新欧洲标准，专门针对一般工程用途的开口模钢锻件的技术交付条件。该标准替代了旧版 BS EN 10250-4:2000，主要更新了不锈钢锻件的化学成分、力学性能及热处理要求，适用于奥氏体、铁素体和马氏体不锈钢材质的自由锻件。如果您正在采购或检验符合欧盟规范的工业锻件，了解 BS EN 10250-4 可确保材料在抗腐蚀性、韧性和强度方面满足工程设计要求。该标准与 BS EN 10250 系列中的其他部分（如碳钢、合金钢锻件标准

展开>> 收起<<
BS EN 10250-4-2021.pdf

共26页,预览4页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：阿拉丁 分类：国际标准 价格：16星币 属性：26 页 大小：669.26KB 格式：PDF 时间：2024-09-16

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 26
评分 收藏
分享
立即下载 VIP免费下载
客服
关注