BS EN 10263-5-2017

VIP免费

阿拉丁 2024-09-16 8 871.6KB 18 页 14星币

侵权投诉

BSI Standards Publication

WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06

Steel rod, bars and wire for cold

heading and cold extrusion

Part 5: Technical delivery conditions for stainless steels

BS EN 10263‑5:2017

National foreword

This British Standard is the UK implementation of EN 10263‑5:2017. It

supersedes BS EN 10263‑5:2001, which is withdrawn.

The UK participation in its preparation was entrusted to Technical

Committee ISE/106, Wire Rod and Wire.

A list of organizations represented on this committee can be obtained on

request to its secretary.

This publication does not purport to include all the necessary provisions

of a contract. Users are responsible for its correct application.

Published by BSI Standards Limited 2017

ISBN 978 0 580 85298 5

ICS 77.140.60; 77.140.65

Compliance with a British Standard cannot confer immunity from

legal obligations.

This British Standard was published under the authority of the

Standards Policy and Strategy Committee on 31 December 2017.

Amendments/corrigenda issued since publication

Date Text affected

BRITISH STANDARD

BS EN 10263‑5:2017

EUROPEAN STANDARD

NORME EUROPÉENNE

EUROPÄISCHE NORM

EN 10263‑5

November 2017

ICS 77.140.60; 77.140.65 Supersedes EN 10263‑5:2001

EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN‑CENELEC Management Centre: Avenue Marnix 17, B‑1000 Brussels

worldwide for CEN national Members

Steel rod, bars and wire for cold heading and cold

extrusion ‑ Part 5: Technical delivery conditions for

stainless steels



transformation à froid et extrusion à

froid ‑ Partie 5: Conditions techniques

de livraison des aciers inoxydables

Walzdraht, Stäbe und Draht aus Kaltstauch‑



Lieferbedingungen für nichtrostende Stähle

This European Standard was approved by CEN on 4 September 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving

this European Standard the status of a national standard without any alteration. Up‑to‑date lists and bibliographical

references concerning such national standards may be obtained on application to the CEN‑CENELEC Management Centre

or to any CEN member.







CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,

Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain,

Sweden, Switzerland, Turkey and United Kingdom.

English Version

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

BS EN 10263-5-2017 是欧洲标准化委员会发布的一项关键标准，全称为《冷加工用钢棒、棒材和线材第5部分：不锈钢》。该标准于2017年正式生效，取代旧版并更新了冷镦和冷挤压用不锈钢材料的技术要求，包括表面质量、尺寸公差、力学性能及化学成分等核心指标。适用于制造螺栓、螺钉、铆钉等紧固件以及冷成型零部件，确保材料在冷加工过程中具备良好的塑性、耐腐蚀性和一致性能。标准内容覆盖马氏体、奥氏体和铁素体不锈钢类型，并明确规定了热处理状态、交货条件与测试方法，是从事汽车、建筑、机械及五金零部件贸

展开>> 收起<<

BS EN 10263-5-2017.pdf

共18页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

BS EN 10263-5-2017

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: