BS EN 13001-3-1-2012 + A2-2018

VIP免费

阿拉丁 2024-09-16 50 2.07MB 120 页 14星币

侵权投诉

BSI Standards Publication

WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06

Cranes - General Design

Part 3-1: Limit States and proof competence of steel structure

BS EN 13001-3-1:2012+A2:2018

EUROPEAN STANDARD

NORME EUROPÉENNE

EUROPÄISCHE NORM

EN 13001-3-1:2012+A2

January 2018

ICS 53.020.20 Supersedes EN 13001-3-1:2012+A1:2013

English Version

Cranes - General Design - Part 3-1: Limit States and proof

competence of steel structure

Appareils de levage à charge suspendue - Conception

générale - Partie 3-1 : Etats limites et vérification

d'aptitude des charpentes en acier

Krane - Konstruktion allgemein - Teil 3-1:

Grenzzustände und Sicherheitsnachweis von

Stahltragwerken

This European Standard was approved by CEN on and includes Amendment 2 approved by CEN on 30 October 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

worldwide for CEN national Members.

Ref. No. EN 13001-3-1:2012+A2:2018 E

National foreword

This British Standard is the UK implementation

of EN 13001‑3‑1:2012+A2:2018. It supersedes

BS EN 13001‑3‑1:2012+A1:2013, which is withdrawn.

This standard, together with BS EN 13001‑1:2004+A1:2009,

BS EN 13001‑2:2014, BS EN 13001‑3‑2:2014, BS EN 13001‑3‑3:2014,

BS EN 13001‑3‑4 and DD CEN/TS 13001‑3‑5:2010, supersedes

BS 2573‑1:1983 and BS 2573‑2:1980, which will be withdrawn on

publication of all parts of the BS EN 13001 series.

Users’ attention is drawn to the fact that neither BS 2573‑1:1983 nor

BS 2573‑2:1980 should be used in conjunction with the EN 13001 series

as they are not complementary. The BS 2573 series will remain current

until all parts of the BS EN 13001 series cited above have been published

to ensure that a coherent package of standards remains available in the

UK during the transition to European standards.







amendment A1 is indicated by  .

The UK participation in its preparation was entrusted to Technical

Committee MHE/3/1, Crane design.

A list of organizations represented on this committee can be obtained on

request to its secretary.

This publication does not purport to include all the necessary provisions

of a contract. Users are responsible for its correct application.

Published by BSI Standards Limited 2018

ISBN 978 0 580 89958 4

ICS 53.020.20

Compliance with a British Standard cannot confer immunity from

legal obligations.

This British Standard was published under the authority of the

Standards Policy and Strategy Committee on 30 November 2012.

Amendments/corrigenda issued since publication

Date 

30 September 2013 Implementation of CEN amendment A1:2013

30 November 2014 National foreword supersession information up‑

dated

31 August 2018 Implementation of CEN amendment A2:2018

BRITISH STANDARD

BS EN 13001‑3‑1:2012+A2:2018