BS EN ISO 10893-2-2011

VIP免费
阿拉丁 2024-09-17 16 1.15MB 22 页 12星币
侵权投诉
BSI Standards Publication
BS EN ISO 10893-2:2011
Non-destructive testing of steel
tubes
Part 2: Automated eddy current testing of
seamless and welded (except submerged
arc-welded) steel tubes for the detection of
imperfections (ISO 10893-2:2011)
BS EN ISO 10893-2:2011 BRITISH STANDARD
National foreword
This British Standard is the UK implementation of EN ISO
10893-2:2011. It supersedes BS EN 10246-3:2000 which is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee ISE/110, Steel Tubes, and Iron and Steel Fittings.
A list of organizations represented on this committee can be
obtained on request to its secretary.
This publication does not purport to include all the necessary
provisions of a contract. Users are responsible for its correct
application.
© BSI 2011
ISBN 978 0 580 59030 6
ICS 23.040.10; 77.040.20; 77.140.75
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 30 April 2011.
Amendments issued since publication
Date Text affected
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN ISO 10893-2
April 2011
ICS 23.040.10; 77.040.20; 77.140.75 Supersedes EN 10246-3:1999
English Version
Non-destructive testing of steel tubes - Part 2: Automated eddy
current testing of seamless and welded (except submerged arc-
welded) steel tubes for the detection of imperfections (ISO
10893-2:2011)
Essais non destructifs des tubes en acier - Partie 2:
Contrôle automatisé par courants de Foucault pour la
détection des imperfections des tubes en acier sans
soudure et soudés (sauf à l'arc immergé sous flux en
poudre) (ISO 10893-2:2011)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 2:
Automatisierte Wirbelstromprüfung nahtloser und
geschweißter (ausgenommen unterpulvergeschweißter)
Stahlrohre zum Nachweis von Unvollkommenheiten (ISO
10893-2:2011)
This European Standard was approved by CEN on 10 December 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN ISO 10893-2:2011: E

标签： #ISO

摘要：

BS EN ISO 10893-2-2011 是国际标准化组织（ISO）与欧洲标准化委员会（CEN）联合发布的关于无缝和焊接钢管（不包括不锈钢管）自动涡流检测的标准规范。该标准为钢管生产过程中的无损检测提供了统一的方法和要求，主要适用于检测钢管表面及近表面的缺陷，如裂纹、折叠、分层等。它详细规定了检测系统的校准、灵敏度设置、对比样管的要求以及验收标准，确保检测结果的可比性和可靠性。通过遵循此标准，制造商能够提高产品质量，满足全球市场对钢管安全性与可靠性的要求，同时减少因缺陷引发的使用风险。该标准

展开>> 收起<<
BS EN ISO 10893-2-2011.pdf

共22页,预览4页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：阿拉丁 分类：国际标准 价格：12星币 属性：22 页 大小：1.15MB 格式：PDF 时间：2024-09-17

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 22
评分 收藏
分享
立即下载 VIP免费下载
客服
关注