SAE AMS 5061H-2017

VIP免费
Carl 2024-11-15 9 1.02MB 6 页 20星币
侵权投诉
__________________________________________________________________________________________________________________________________________
SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is
entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”
SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and
suggestions.
Copyright © 2017 SAE International
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of SAE.
TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)
Tel: +1 724-776-4970 (outside USA)
Fax: 724-776-0790
Email: CustomerService@sae.org
SAE WEB ADDRESS: http://www.sae.org
SAE values your input. To provide feedback on this
Technical Report, please visit
http://standards.sae.org/AMS5061H
AEROSPACE
MATERIAL SPECIFICATION
AMS5061™
REV. H
Issued 1948-09
Revised 2004-03
Noncurrent 2009-02
Reaf. Nonc. 2013-04
Stabilized 2017-08
Superseding AMS5061G
Steel, Low Carbon Bars, and Wire
0.08 - 0.20
(Composition similar to UNS K00802)
RATIONALE
AMS5061H has been stabilized as mature technology that has similar specifications.
STABILIZED NOTICE
AMS5061H has been declared "STABILIZED" by SAE AMS Carbon and Low Alloy Steels Committee E. This document will
no longer be updated and may no longer represent standard industry practice. This document was stabilized because
other documents contain similar but not necessarily equivalent requirements. Previously this document was reaffirmed
non-current. The last technical update of this document occurred in March 2004. Users of this document should refer to
the cognizant engineering organization for disposition of any issues with reports/certifications to this specification; including
exceptions listed on the certification.
NOTE: In many cases, the purchaser may represent a sub tier supplier and not the cognizant engineering organization.
AMS Committee E recommends that the following similar but not identical specifications may be considered for future
procurement. This listing does not constitute authority to substitute these specifications for the “STABILIZED” specification.
ASTM A29/A29M
ASTM A510/A510M
Downloaded from SAE International by Univ of Toronto, Thursday, February 10, 2022
SAE INTERNATIONAL AMS5061™H Page 2 of 6
Downloaded from SAE International by Univ of Toronto, Thursday, February 10, 2022
SAE INTERNATIONAL AMS5061™H Page 3 of 6
Downloaded from SAE International by Univ of Toronto, Thursday, February 10, 2022

标签： #MS

摘要：

SAE AMS 5061H-2017 是航空与汽车工业领域的关键材料标准，全称为“钢线材和钢棒材，碳钢，0.15-0.35 铅（含铅易切削钢）”。该标准由美国汽车工程师学会（SAE）发布，取代了之前的版本，明确规定了用于航空航天及高端机械制造中易切削碳钢线材与棒材的化学成分、机械性能、热处理工艺、表面质量及检验要求。其核心在于规范含铅碳钢（通常为1215或12L14类）的制造与验收流程，确保材料在高速切削加工中具备优异的断屑性能、表面光洁度及尺寸稳定性。适用于制造紧固件、连接器、精密轴类及液压系

展开>> 收起<<
SAE AMS 5061H-2017.pdf

共6页,预览4页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：Carl 分类：国外协会 价格：20星币 属性：6 页 大小：1.02MB 格式：PDF 时间：2024-11-15

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 6
评分 收藏
分享
立即下载 VIP免费下载
客服
关注