GOST 1284.3_1996

VIP免费

小飞侠Robben 2025-05-01 7 3.9MB 64 页 15星币

侵权投诉

GOST 1284.3-96

INTERSTATE STANDARD

DRIVING V-BELTS OF STANDARD

CROSS-SECTIONS

TRANSMITTED POWERS

Official Edition

English Version Approved by Interstandard

INTERSTATE COUNCIL

ON STANDARDIZATION, METROLOGY AND CERTIFICATION

Minsk

Provided by IHS under license with GOST /H/

Not for Resale

No reproduction or networking permitted without license from IHS

--`,,```,,,,````-`-`,,`,,`,`,,`---

ГОСТ 1284.3-96

Foreword

1 DEVELOPED by Joint-Stock Company “Research Institute of Rubber Industry” (JSC

“NIIRP”), ТC80

SUBMITTED by Gosstandart of Russia

2 ADOPTED by Interstate Council on Standardization, Metrology and Certification (protocol No.

9—96, dated 12.04.96)

Votes in favor:

State National standards body

ublic of Azerbai

an Az

osstandar

Republic of Belarus Belstandart

Republic of Kazakhstan Gosstandart of Republic of Kazakhstan

Republic of Kirghizia Kirghizstandart

Republic of Moldova Moldovastandart

Russian Federation Gosstandart of Russia

Republic of Tajikistan State centre on standardization, metrology and

certification of Tadjikistan

Turkmenistan Head State Inspectorate of Turkmenistan

Ukraine Gosstandart of Ukraine

3 This Standard complies to international standard ISO 5292:1980 “Belt drives - V-belts and V-

ribbed belts - Calculation of power ratings” regarding the power rating calculation

4 Interstate standard GOST 1284 introduced directly from 01.01.98 as еру state standard of the

Russian Federation by Decree No. 557, dated 04.09.96, of Сommittee on standardization,

metrology and certification of the Russian Federation,

5 IN PLACE OF GOST 1284.3-80

This Standard may not be reproduced, in full or in part, reprinted or distributed as an official

publication in the territory of the Russian Federation without the permission of Gosstandart of

Russia

Provided by IHS under license with GOST /H/

Not for Resale

No reproduction or networking permitted without license from IHS

--`,,```,,,,````-`-`,,`,,`,`,,`---

ГОСТ 1284.3-96

III

Contents

1 Purpose and scope ..................................................................................................................... 1

2 References ................................................................................................................................. 1

3 Dependence of transmitted power on the belt sections during a specific rotation speed........... 1

3.4 Calculation schemes for triple-pulley transmissions............................................................... 9

3.5 Power calculations for V-belt transmissions for a double-pulley system .............................. 11

3.6 Belt pretension ........................................................................................................................ 59

Provided by IHS under license with GOST /H/

Not for Resale

No reproduction or networking permitted without license from IHS

--`,,```,,,,````-`-`,,`,,`,`,,`---

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

GOST 1284.3_1996 是俄罗斯及独联体国家采用的一项关键工业标准，专门针对传动用普通V带和窄V带的长度测量与公差要求进行规范。该标准源于苏联时期的技术体系，并于1996年更新发布，旨在统一V带在机械传动系统中的尺寸精度与互换性，特别适用于农业机械、工业设备及汽车传动系统的设计、生产与检验。标准详细规定了V带基准长度的测定方法、允许偏差范围以及检验规则，确保不同制造商生产的V带在配套使用时能够稳定传递功率并延长使用寿命。对于从事机械设计、国际贸易或设备维护的专业人员而言，掌握GOST

展开>> 收起<<

GOST 1284.3_1996.pdf

共64页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

GOST 1284.3_1996

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: