AS 1530.1-1994(R2016)

VIP专免

标准小能手 2025-09-22 14 376.96KB 33 页 15星币

侵权投诉

AS 1530.1—1994

Australian Standard

Methods for fire tests on building

materials, components and

structures

Part 1: Combustibility test for

materials

Reconfirmed 2016

This Australian Standard was prepared by committee BD/18, Fire Tests on Building

Materials, Components and Structures. It was approved on behalf of the Council of

Standards Australia on 10 January 1994 and published on 21 March 1994.

The following interests are represented on Committee BD/18:

Australian Assembly of Fire Authorities

Australian-British Chamber of Commerce

Australian Chamber of Commerce and Industry

Australian Fire Protection Association

Australian Institute of Building

Australian Uniform Building Regulations Coordinating Council

Australian Wool Testing Authority

Building Research Association of New Zealand

Bureau of Steel Manufacturers of Australia

Cement and Concrete Association of Australia

Commonwealth Fire Board

CSIRO, Division of Building Construction and Engineering

Fire Protection Industry Association of Australia

Forestry Commission of New South Wales

Insurance Council of Australia

National Association of Forest Industries

Plastics Industry Association

Review of Australian Standards. To keep abreast of progress in industry, Australian Standards are subject

to periodic review and are kept up to date by the issue of amendments or new editions as necessary. It is

important therefore that Standards users ensure that they are in possession of the latest edition, and any

amendments thereto.

Full details of all Australian Standards and related publications will be found in the Standards Australia

Catalogue of Publications; this information is supplemented each month by the magazine ‘The Australian

Standard’, which subscribing members receive, and which gives details of new publications, new editions

and amendments, and of withdrawn Standards.

Suggestions for improvements to Australian Standards, addressed to the head office of Standards Australia,

are welcomed. Notification of any inaccuracy or ambiguity found in an Australian Standard should be made

without delay in order that the matter may be investigated and appropriate action taken.

This Standard was issued in draft form for comment as DR 92205.

AS 1530.1—1994 (Reconfirmed) 2016-05-27

STANDARDS AUSTRALIA

RECONFIRMATION

AS 1530.1—1994

Methods for fire tests on building materials, components and structures

Part 1: Combustibility test for materials

RECONFIRMATION NOTICE

Technical Committee FP-018 has reviewed the content of this publication and in

accordance with Standards Australia procedures for reconfirmation, it has been

determined that the publication is still valid and does not require change.

Certain documents referenced in the publication may have been amended since the

original date of publication. Users are advised to ensure that they are using the latest

versions of such documents as appropriate, unless advised otherwise in this

Reconfirmation Notice.

Approved for reconfirmation in accordance with Standards Australia procedures for

reconfirmation on 18 November 2015.

The following are represented on Technical Committee FP-018:

Australasian Fire and Emergency Service Authorities Council

Australian Building Codes Board

Australian Industry Group

Australian Institute of Building

AWTA Textile Testing

Building Research Association of New Zealand

Bureau of Steel Manufacturers of Australia

CSIRO

Engineers Australia

Fire Protection Association Australia

Fire Protection Association New Zealand

Forest and Wood Products Australia

Insulated Panel Council Australasia

Insulation Australasia

Insurance Council of Australia

Plastics and Chemicals Industries Association

Property Council of Australia

Society of Fire Protection Engineers

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

AS 1530.1-1994(R2016) 是澳大利亚标准中关于建筑材料、组件和构件的可燃性测试方法的重要规范。该标准于1994年首次发布，并于2016年重新确认，旨在评估材料在特定条件下对火焰蔓延的抵抗能力。通过模拟小规模火焰接触，测试材料的引燃时间、火焰传播速度及燃烧行为，为建筑防火安全设计提供关键数据支持。该规范适用于各类建筑产品，如装饰材料、隔热层及结构板材，确保其符合澳大利亚建筑规范（NCC）的合规性要求。了解 AS 1530.1 有助于工程师、设计师和质检人员优化材料选择，降低火灾风

展开>> 收起<<

AS 1530.1-1994(R2016).pdf

共33页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

AS 1530.1-1994(R2016)

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: