AS 1720.3-2016

VIP专免

标准小能手 2025-09-22 27 6.43MB 121 页 18星币

侵权投诉

AS 1720.3:2016

Timber structures

Part 3: Design criteria for timber-framed

residential buildings

This Australian Standard® was prepared by Committee TM-010, Timber Structures and

Framing. It was approved on behalf of the Council of Standards Australia on 13 June 2016.

This Standard was published on 29 June 2016.

The following are represented on Committee TM-010:

•Australian Building Codes Board

•Australian Institute of Building

•Building Research Association of New Zealand

•Engineered Wood Products Association of Australasia

•Engineers Australia

•Forest and Wood Products Australia

•Forest Industries Federation, WA

•Frame & Truss Manufacturers Association Australia

•Glued Laminated Timber Association of Australia

•Housing Industry Association

•Housing SA

•Institution of Fire Engineers

•James Cook University

•Master Builders Australia

•Ministry of Business, Innovation and Employment, New Zealand

•New Zealand Timber Industry Federation

•Timber Development Association, NSW

•Timber Queensland

•University of Technology, Sydney

•Wood Processors & Manufacturers Association of New Zealand

This Standard was issued in draft form for comment as DR AS 1720.3:2015.

Standards Australia wishes to acknowledge the participation of the expert individuals that

contributed to the development of this Standard through their representation on the

Committee and through the public comment period.

Keeping Standards up-to-date

Australian Standards® are living documents that reflect progress in science, technology and

systems. To maintain their currency, all Standards are periodically reviewed, and new editions

are published. Between editions, amendments may be issued.

Standards may also be withdrawn. It is important that readers assure themselves they are

using a current Standard, which should include any amendments that may have been

published since the Standard was published.

Detailed information about Australian Standards, drafts, amendments and new projects can

be found by visiting www.standards.org.au

Standards Australia welcomes suggestions for improvements, and encourages readers to

notify us immediately of any apparent inaccuracies or ambiguities. Contact us via email at

mail@standards.org.au, or write to Standards Australia, GPO Box 476, Sydney, NSW 2001.

AS 1720.3:2016

Australian Standard®

Timber structures

Part 3: Design criteria for timber-framed

residential buildings

Originated as AS 1684.1—1999.

Revised and redesignated as AS 1720.3:2016.

ll rights are reserved. No part of this work may be reproduced or copied in any form or by

any means, electronic or mechanical, including photocopying, without the written

permission of the publisher, unless otherwise permitted under the Copyright Act 1968.

Published by SAI Global Limited under licence from Standards Australia Limited, GPO Box

476, Sydney, NSW 2001, Australia

ISBN 978 1 76035 514 2

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

AS 1720.3-2016 是澳大利亚针对木材结构防火设计的国家标准，全称为《木材结构——第3部分：防火设计》。该标准由澳大利亚标准协会（Standards Australia）发布，主要规定了在火灾条件下木结构构件的承载能力、防火分隔性能以及耐火极限的计算与评估方法。标准涵盖了实木、胶合木、木基板材等多种木材产品的防火设计参数，并提供了暴露于标准火灾时的温度分布、炭化速率和剩余截面计算方法。AS 1720.3-2016 对于建筑工程师、消防设计人员和建筑审批机构在合规性评估中具有重要指导意义

展开>> 收起<<

AS 1720.3-2016.pdf

共121页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

AS 1720.3-2016

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: