BS EN 253-2019 区域供热管道 用于直埋热水管网的粘合单管系统 工厂制造的管道组件由钢制供水管、聚氨酯隔热材料和聚乙烯套管组成

VIP免费
史蒂文 2025-12-21 32 2.64MB 46 页 16星币
侵权投诉
BSI Standards Publication
District heating pipes – Bonded single
pipe systems for directly buried hot water
networks – Factory made pipe assembly of
steel service pipe, polyurethane thermal
insulation and a casing of polyethylene
BS EN 253:2019
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 253
October 2019
ICS 23.040.07; 23.040.10 Supersedes EN 253:2009+A2:2015
English Version
District heating pipes - Bonded single pipe systems for
directly buried hot water networks - Factory made pipe
assembly of steel service pipe, polyurethane thermal
insulation and a casing of polyethylene
Tuyaux de chauffage urbain - Systèmes bloqués de
tuyaux pour les réseaux d'eau chaude enterrées
directement - Assemblages de tubes de service en acier
manufacturés, isolation thermique en polyuréthane et
tube de protection en polyéthylène
Fernwärmerohre - Werkmäßig gedämmte
Verbundmantelrohrsysteme für direkt erdverlegte
Fernwärmenetze - Verbund-Rohrsystem bestehend
aus Stahl-Mediumrohr, Polyurethan-Wärmedämmung
und Außenmantel aus Polyethylen
This European Standard was approved by CEN on 26 August 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 253:2019 E
National foreword
This British Standard is the UK implementation of EN 253:2019. It
supersedes BS EN 253:2009+A2:2015, which is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee RHE/9, Insulated underground pipelines.
A list of organizations represented on this committee can be obtained on
request to its secretary.
This publication does not purport to include all the necessary provisions
of a contract. Users are responsible for its correct application.
© The British Standards Institution 2019
Published by BSI Standards Limited 2019
ISBN 978 0 580 99697 9
ICS 23.040.07; 23.040.10
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 October 2019.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN 253:2019
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 253
October 2019
ICS 23.040.07; 23.040.10 Supersedes EN 253:2009+A2:2015
English Version
District heating pipes - Bonded single pipe systems for
directly buried hot water networks - Factory made pipe
assembly of steel service pipe, polyurethane thermal
insulation and a casing of polyethylene
Tuyaux de chauffage urbain - Systèmes bloqués de
tuyaux pour les réseaux d'eau chaude enterrées
directement - Assemblages de tubes de service en acier
manufacturés, isolation thermique en polyuréthane et
tube de protection en polyéthylène
Fernwärmerohre - Werkmäßig gedämmte
Verbundmantelrohrsysteme für direkt erdverlegte
Fernwärmenetze - Verbund-Rohrsystem bestehend
aus Stahl-Mediumrohr, Polyurethan-Wärmedämmung
und Außenmantel aus Polyethylen
This European Standard was approved by CEN on 26 August 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 253:2019 E
BS EN 253:2019

标签： #钢 #管 #隔热材料

摘要：

BS EN 253-2019 是关于区域供热管道系统的欧洲标准，专门规范用于直埋热水管网的粘合单管系统。该标准详细规定了工厂制造的管道组件的技术要求，这些组件由钢制供水管、聚氨酯隔热材料和聚乙烯外套管组成。通过统一设计、生产与测试流程，本标准确保管道系统具备优异的热绝缘性能、机械强度及长期耐腐蚀能力，适用于集中供热和供冷等能源输送场景。对于从事供热工程、管道施工或能源基础设施建设的专业人士而言，深入了解 BS EN 253-2019 有助于提升项目质量与安全性，延长管网使用寿命，并优化热力输送效

展开>> 收起<<
BS EN 253-2019 区域供热管道 用于直埋热水管网的粘合单管系统 工厂制造的管道组件由钢制供水管、聚氨酯隔热材料和聚乙烯套管组成.pdf

共46页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：史蒂文 分类：国际标准 价格：16星币 属性：46 页 大小：2.64MB 格式：PDF 时间：2025-12-21

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 46
评分 收藏
分享
立即下载 VIP免费下载
客服
关注