BS EN 15698-1-2019 区域供热管道 用于直埋热水管网的粘合双管系统 工厂制造的双管组件 由钢制供水管、聚氨酯隔热材料和一层聚乙烯套管组成

VIP免费
史蒂文 2025-12-21 8 799.17KB 18 页 16星币
侵权投诉
BSI Standards Publication
District heating pipes – Bonded twin pipe systems
for directly buried hot water networks
Part 1: Factory made twin pipe assembly of steel service pipes,
polyurethane thermal insulation and one casing of polyethylene
BS EN 15698‑1:2019
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 15698-1
October 2019
ICS 23.040.07; 23.040.10 Supersedes EN 15698-1:2009
English Version
District heating pipes - Bonded twin pipe systems for
directly buried hot water networks - Part 1: Factory made
twin pipe assembly of steel service pipes, polyurethane
thermal insulation and one casing of polyethylene
Tuyaux de chauffage urbain - Systèmes bloqués de
tuyaux doubler pré-isolés pour les réseaux d'eau
chaude enterrés directement - Assemblage de bitudes
pout tube de service en acier, isolation thermique en
polyuréthane et tube de protection en polyéthylène
Fernwärmerohre - Verbundmanteldoppelrohre für
direkt erdverlegte Fernwärmenetze - Teil 1:
Werkmäßig hergestelltes Verbund-Doppelrohrsystem,
bestehend aus Stahl-Mediumrohr, Polyurethan-
Wärmedämmung und einem Mantel aus Polyethylen
This European Standard was approved by CEN on 12 August 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 15698-1:2019 E
National foreword
This British Standard is the UK implementation of EN 15698‑1:2019. It
supersedes BS EN 15698‑1:2009, which is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee RHE/9, Insulated underground pipelines.
A list of organizations represented on this committee can be obtained on
request to its secretary.
This publication does not purport to include all the necessary provisions
of a contract. Users are responsible for its correct application.
© The British Standards Institution 2019
Published by BSI Standards Limited 2019
ISBN 978 0 580 51887 4
ICS 23.040.07; 23.040.10
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 October 2019.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN 15698‑1:2019
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 15698-1
October 2019
ICS 23.040.07; 23.040.10 Supersedes EN 15698-1:2009
English Version
District heating pipes - Bonded twin pipe systems for
directly buried hot water networks - Part 1: Factory made
twin pipe assembly of steel service pipes, polyurethane
thermal insulation and one casing of polyethylene
Tuyaux de chauffage urbain - Systèmes bloqués de
tuyaux doubler pré-isolés pour les réseaux d'eau
chaude enterrés directement - Assemblage de bitudes
pout tube de service en acier, isolation thermique en
polyuréthane et tube de protection en polyéthylène
Fernwärmerohre - Verbundmanteldoppelrohre für
direkt erdverlegte Fernwärmenetze - Teil 1:
Werkmäßig hergestelltes Verbund-Doppelrohrsystem,
bestehend aus Stahl-Mediumrohr, Polyurethan-
Wärmedämmung und einem Mantel aus Polyethylen
This European Standard was approved by CEN on 12 August 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 15698-1:2019 E
BS EN 15698‑1:2019

标签： #钢 #管 #隔热材料

摘要：

本页面提供 BS EN 15698-1-2019 标准的详细解读，该标准专为区域供热管道中的直埋热水管网设计，重点规范了粘合双管系统的工厂制造双管组件。这些组件由钢制供水管、聚氨酯隔热材料以及一层聚乙烯套管组成，确保在高温高压环境下具备优异的保温性能、机械强度与长期耐用性。通过遵循该标准，用户可确保管道系统的设计、制造与安装符合欧洲统一要求，有效减少热损失、防止腐蚀并延长使用寿命。适用于供热工程师、项目承包商及市政规划人员参考，助力实现高效、安全的直埋供热网络建设与维护。

展开>> 收起<<
BS EN 15698-1-2019 区域供热管道 用于直埋热水管网的粘合双管系统 工厂制造的双管组件 由钢制供水管、聚氨酯隔热材料和一层聚乙烯套管组成.pdf

共18页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：史蒂文 分类：国际标准 价格：16星币 属性：18 页 大小：799.17KB 格式：PDF 时间：2025-12-21

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 18
评分 收藏
分享
立即下载 VIP免费下载
客服
关注