BS EN 16809-1-2019 建筑物隔热产品 松散填充发泡聚苯乙烯珠粒和粘合发泡聚苯乙烯珠粒的现场成型产品 安装前粘合和松散填充产品规范

VIP免费
史蒂文 2025-12-21 8 806.29KB 34 页 16星币
侵权投诉
BSI Standards Publication
Thermal insulation products of buildings —

expanded polystyrene (EPS) beads and
bonded expanded polystyrene beads


EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 16809-1
November 2019
ICS 91.100.60
English Version
Thermal insulation products of buildings - In-situ formed
products from loose-fill expanded polystyrene (EPS) beads
and bonded expanded polystyrene beads - Part 1:
Specification for the bonded and loose-fill products before
installation
Produits isolants thermiques destinés aux bâtiments -
Produits formés sur place à partir de billes en
polystyrène expansé (PSE) en vrac et de billes en
polystyrène expansé liées - Partie 1 : Spécification des
produits avec et sans liant avant mise en œuvre
Wärmedämmstoffe für Gebäude - An der
Verwendungsstelle hergestellte Produkte aus losen
expandierten Polystyrolkugeln (EPS) und gebundenen
expandierten Polystyrolkugeln - Teil 1: Spezifikation
für gebundene und lose Schütt- und
Einblasdämmstoffe vor dem Einbau
This European Standard was approved by CEN on 23 September 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 16809-1:2019 E
National foreword
This British Standard is the UK implementation of EN 16809‑1:2019.
The UK participation in its preparation was entrusted to Technical
Committee PRI/72, Rigid cellular materials.
A list of organizations represented on this committee can be obtained on
request to its secretary.
This publication does not purport to include all the necessary provisions
of a contract. Users are responsible for its correct application.
© The British Standards Institution 2019
Published by BSI Standards Limited 2019
ISBN 978 0 580 51459 3
ICS 91.100.60
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 December 2019.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN 16809‑1:2019
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 16809-1
November 2019
ICS 91.100.60
English Version
Thermal insulation products of buildings - In-situ formed
products from loose-fill expanded polystyrene (EPS) beads
and bonded expanded polystyrene beads - Part 1:
Specification for the bonded and loose-fill products before
installation
Produits isolants thermiques destinés aux bâtiments -
Produits formés sur place à partir de billes en
polystyrène expansé (PSE) en vrac et de billes en
polystyrène expansé liées - Partie 1 : Spécification des
produits avec et sans liant avant mise en œuvre
Wärmedämmstoffe für Gebäude - An der
Verwendungsstelle hergestellte Produkte aus losen
expandierten Polystyrolkugeln (EPS) und gebundenen
expandierten Polystyrolkugeln - Teil 1: Spezifikation
für gebundene und lose Schütt- und
Einblasdämmstoffe vor dem Einbau
This European Standard was approved by CEN on 23 September 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 16809-1:2019 E
BS EN 16809‑1:2019

标签： #建筑物 #隔热 #松散填充

摘要：

BS EN 16809-1-2019 是欧洲标准，专门规范建筑物隔热产品中松散填充发泡聚苯乙烯（EPS）珠粒及粘合发泡聚苯乙烯珠粒的现场成型产品，适用于安装前的粘合与松散填充工艺。该标准详细规定了相关产品的性能要求、测试方法及质量控制指标，确保其在建筑隔热工程中的可靠性和能效表现。通过明确材料规格、施工前处理流程及热工性能验证，本标准为工程师、建筑师和施工方提供了统一的技术依据，有助于提升建筑保温系统的安全性与节能效果，尤其适用于外墙、屋顶及地面等部位的隔热应用场景。

展开>> 收起<<
BS EN 16809-1-2019 建筑物隔热产品 松散填充发泡聚苯乙烯珠粒和粘合发泡聚苯乙烯珠粒的现场成型产品 安装前粘合和松散填充产品规范.pdf

共34页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：史蒂文 分类：国际标准 价格：16星币 属性：34 页 大小：806.29KB 格式：PDF 时间：2025-12-21

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 34
评分 收藏
分享
立即下载 VIP免费下载
客服
关注