BS EN 16933-2-2017 (2018) 水力设计

VIP免费
史蒂文 2025-12-21 25 2.73MB 80 页 16星币
侵权投诉
BSI Standards Publication
WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06
Drain and sewer systems outside buildings - Design
Part 2: Hydraulic design
BS EN 16933‑2:2017
Incorporating corrigendum June 2018
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 16933-2
September 2017
ICS 93.030
English Version
Drain and sewer systems outside buildings - Design - Part
2: Hydraulic design
Réseaux d'évacuation et d'assainissement à l'extérieur
des bâtiments - Conception - Partie 2 : Conception
hydraulique
Entwässerungssysteme außerhalb von Gebäuden -
Planung - Teil 2: Hydraulische Planung
This European Standard was approved by CEN on 30 July 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 16933-2 E
National foreword
This British Standard is the UK implementation of EN 16933‑2:2017.
The UK participation in its preparation was entrusted to Technical
Committee B/505/22.
The UK committee draws users' attention to the National Annex NA,
which provides further guidance to assist users in the application of
BS EN 16933‑2:2017.
A list of organizations represented on this committee can be obtained on
request to its secretary.
This publication does not purport to include all the necessary provisions
of a contract. Users are responsible for its correct application.
© The British Standards Institution 2018
Published by BSI Standards Limited 2018
ISBN 978 0 539 01620 8
ICS 93.030
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 October 2017.
Amendments/corrigenda issued since publication
Date Text affected
30 June 2018 Addition of a National Annex
BRITISH STANDARD
BS EN 16933‑2:2017
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 16933-2
September 2017
ICS 93.030
English Version
Drain and sewer systems outside buildings - Design - Part
2: Hydraulic design
Réseaux d'évacuation et d'assainissement à l'extérieur
des bâtiments - Conception - Partie 2 : Conception
hydraulique
Entwässerungssysteme außerhalb von Gebäuden -
Planung - Teil 2: Hydraulische Planung
This European Standard was approved by CEN on 30 July 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 16933-2 E
BS EN 16933‑2:2017
摘要：

This document provides an authoritative SEO-optimized summary of the BS EN 16933-2-2017 (2018) standard for hydraulic design, focusing on key requirements for drainage and sewerage systems outside buildings. It outlines the design principles, calcula

展开>> 收起<<
BS EN 16933-2-2017 (2018) 水力设计.pdf

共80页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：史蒂文 分类：国际标准 价格：16星币 属性：80 页 大小：2.73MB 格式：PDF 时间：2025-12-21

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 法兰 铝合金
/ 80
评分 收藏
分享
立即下载 VIP免费下载
客服
关注