BS EN 17101-2018 建筑物隔热产品 外保温复合系统(ETICS)用单组分聚氨酯粘合泡沫的鉴定方法和测试方法

VIP免费
史蒂文 2025-12-21 9 1.11MB 28 页 16星币
侵权投诉
BSI Standards Publication
WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06
Thermal insulation products for buildings -

one-component PU adhesive foam for External
Thermal Insulation Composite Systems (ETICS)
BS EN 17101:2018
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 17101
September 2018
ICS 91.100.60
English Version
Thermal insulation products for buildings - Methods of
identification and test methods for one-component PU
adhesive foam for External Thermal Insulation Composite
Systems (ETICS)
Produits isolants thermiques pour le bâtiment -
Méthodes d'identification et méthodes d'essai des
mousses PU adhésives monocomposant pour systèmes
d'isolation thermique extérieure par enduit sur isolant
(ETICS)
Wärmedämmstoffe für Gebäude - Methoden der
Identifizierung und Testmethoden für Ein-
Komponenten-PU-Klebstoffschaum für
Wärmedämmverbundsysteme (WDVS)
This European Standard was approved by CEN on 23 April 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 17101:2018 E
National foreword
This British Standard is the UK implementation of EN 17101:2018.
The UK participation in its preparation was entrusted to Technical
Committee B/540, Energy performance of materials components
and buildings.
A list of organizations represented on this committee can be obtained on
request to its secretary.
This publication does not purport to include all the necessary provisions
of a contract. Users are responsible for its correct application.
© The British Standards Institution 2018
Published by BSI Standards Limited 2018
ISBN 978 0 580 96890 7
ICS 91.100.60
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 30 September 2018.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN 17101:2018
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 17101
September 2018
ICS 91.100.60
English Version
Thermal insulation products for buildings - Methods of
identification and test methods for one-component PU
adhesive foam for External Thermal Insulation Composite
Systems (ETICS)
Produits isolants thermiques pour le bâtiment -
Méthodes d'identification et méthodes d'essai des
mousses PU adhésives monocomposant pour systèmes
d'isolation thermique extérieure par enduit sur isolant
(ETICS)
Wärmedämmstoffe für Gebäude - Methoden der
Identifizierung und Testmethoden für Ein-
Komponenten-PU-Klebstoffschaum für
Wärmedämmverbundsysteme (WDVS)
This European Standard was approved by CEN on 23 April 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 17101:2018 E
BS EN 17101:2018
摘要:

本页面详细介绍BS EN 17101-2018标准,该标准是欧洲针对建筑物隔热产品中用于外保温复合系统(ETICS)的单组分聚氨酯粘合泡沫所制定的鉴定方法与测试方法规范。标准涵盖了泡沫的物理性能、粘结强度、尺寸稳定性、老化行为以及施工适用性等关键指标的测试程序与判定要求。通过遵循该标准,制造商、检测机构及工程人员能够统一评估单组分聚氨酯泡沫在ETICS系统中的应用可靠性,确保保温层与基材之间的长期粘合效果及系统整体安全。本内容为从事建筑节能、外墙外保温材料研发与质量控制的专业人士提供权威技术参考

展开>> 收起<<
BS EN 17101-2018 建筑物隔热产品 外保温复合系统(ETICS)用单组分聚氨酯粘合泡沫的鉴定方法和测试方法.pdf

共28页,预览3页

还剩页未读, 继续阅读

声明:本文档系会员上传,若文档所含内容侵犯了您的版权或隐私,请立即通知,我们立即给予侵权申诉删除!
作者:史蒂文 分类:国际标准 价格:16星币 属性:28 页 大小:1.11MB 格式:PDF 时间:2025-12-21

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务
/ 28
客服
关注