沙特阿美公司标准 SAES-N-100-2020 耐火系统 Refractory Systems

VIP专免
那山那人那狗 2025-12-22 21 394.96KB 17 页 20星币
侵权投诉
Previous Issue: 07 August 2017 Next Planned Update: 12 July 2025 Page 1 of 17
Contact: (barrha0b) ©Saudi Aramco 2020. All rights reserved.
Saudi Aramco: Company General Use
Engineering Standard
SAES-N-100 12 July 2020
Refractory Systems
Document Responsibility: Heat Transfer Equipment Standards Committee
Contents
Summary of Change .................................................................... 2
1. Scope ..................................................................................... 3
2. Conflicts and Deviations ......................................................... 3
3. References ............................................................................. 3
4. Terminology ............................................................................ 5
5. Responsibilities ...................................................................... 7
6. Design .................................................................................... 7
7. Physical Properties ............................................................... 10
8. Metallic Components ............................................................ 11
9. Refractory Systems .............................................................. 12
10. Refractory Installation ........................................................... 12
Document History ....................................................................... 12
Table 1 - Mandatory Refractory Systems ................................... 13
Table 2 - Monolithic Refractory Material Compliance
Requirement ............................................................................... 16
Document Responsibility: Heat Transfer Equipment Standards Committee SAES-N-100
Issue Date: 12 July 2020
Next Planned Update: 12 July 2025 Refractory Systems
Saudi Aramco: Company General Use
©Saudi Aramco 2020. All rights reserved.
Page 2 of 17
Saudi Aramco: Company General Use
Summary of Change
Paragraph Number
Change Type
Technical Changes
Previous Revesion
(22 July, 2012)
Current
Revesion (19
July, 2020)
(Addition, Modification,
Deletion)
3
3
Addition
Reference to ASTM C832
3
3
Deletion
Updated PIP list of references
3
3
Addition
Reference to ASTM C865
-
4.1
Addition
Accronyms section is added
-
6.1.2
Addition
New requirement for refractory lining
design for SRU Thermal Reactors and
Oxidizers.
-
6.1.3
Addition
New requirement for upgrading existing
refractory lining system in SRU Thermal
Reactors and Oxidizers.
Table 1
Table 1
Modification
Updated SRU Thermal Reactor
requirement such as allowing for
Insulating Firebricks (IFB) as backup
layer and madating use of brick around
nozzles etc.
Document Responsibility: Heat Transfer Equipment Standards Committee SAES-N-100
Issue Date: 12 July 2020
Next Planned Update: 12 July 2025 Refractory Systems
Saudi Aramco: Company General Use
©Saudi Aramco 2020. All rights reserved.
Page 3 of 17
Saudi Aramco: Company General Use
1 Scope
1.1 This standard establishes the minimum mandatory requirements for the design
and selection of refractory systems for sulfur recovery unit equipment, reactors
pressure vessels, boilers, heat exchangers, flare tips, ground flares, burn pits, and
piping.
1.2 This standard covers Refractory selections to be limited to monolithic refractory
systems, refractory ceramic fiber (RCF) systems, and refractory brick systems.
1.3 The requirements detailed in this standard are aimed at standardizing refractory
systems used in Saudi Aramco facilities.
1.4 For equipment and refractory systems not covered by this standard, the Saudi
Aramco Engineer is to be contacted for guidance in determining the extent to
which this standard is applicable.
1.5 This standard covers the design requirements and material selection of new and
existing refractory systems.
1.6 API STD 560 covers the refractory design requirements and material selection
for process fired heaters.
2 Conflicts and Deviations
Any conflicts between this document and other applicable Mandatory Saudi Aramco
Engineering Requirements (MSAERs) shall be addressed to the EK&RD Coordinator.
Any deviation from the requirements herein shall follow internal company procedure
SAEP-302.
3 References
The selection of material and equipment, and the design, construction, maintenance, and
repair of equipment and facilities covered by this standard shall comply with the latest
edition of the references listed below, unless otherwise noted.
3.1 Saudi Aramco References
Saudi Aramco Engineering Procedure
SAEP-302 Instructions for Obtaining a Waiver of a Mandatory
Saudi Aramco Engineering Requirement
Saudi Aramco Engineering Standards

标签： #沙特

摘要：

本页面提供沙特阿美公司标准 SAES-N-100-2020（耐火系统）的详细解读与技术资源。该标准是沙特阿美针对石油、天然气及石化工业中耐火材料设计、选材、施工、检验与维护的强制性规范，涵盖了耐火砖、浇注料、陶瓷纤维等系统的性能要求及耐热、耐腐蚀标准。通过学习该标准，工程师与项目团队能够确保设备在高温工况下的安全运行，并符合沙特阿美在防火、隔热及环保方面的最新合规要求。本页面还归纳了与 SAES-N-100 系列标准相关的常见问题与实施要点，助力用户快速掌握关键参数与验收准则，从而在炼油、海上平

展开>> 收起<<
沙特阿美公司标准 SAES-N-100-2020 耐火系统 Refractory Systems.pdf

共17页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：那山那人那狗 分类：国际标准 价格：20星币 属性：17 页 大小：394.96KB 格式：PDF 时间：2025-12-22

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 17
评分 收藏
分享
立即下载 VIP免费下载
客服
关注