MIL-DTL-2710C-2010 普通型和梨形可拆卸链节

VIP免费

standardshare 2026-04-19 8 885.01KB 22 页 18星币

侵权投诉

Comments, suggestions, or questions on this document should be addressed to Defense

Logistics Agency Aviation VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616,

or e-mailed to STDZNMGT@dla.mil. Since contact information can change, you may want to

verify the currency of this address information using the ASSIST database at

https://assist.daps.dla.mil/.

AMSC N/A FSC 4010

INCH-POUND

MIL-DTL-2710C

10 September 2010

SUPERSEDING

MIL-L-2710B

25 March 1991

DETAIL SPECIFICATION

LINKS, CHAIN, DETACHABLE, REGULAR AND PEAR-SHAPED

Reactivated after 10 September 2010 and may be used for

new and existing designs and acquisitions.

This specification is approved for use by all Departments and Agencies of the

Department of Defense.

1. SCOPE

1.1 Scope. This specification covers regular and pear-shaped detachable links for

connecting shots of anchor chain, for connecting the anchor to the outboard swivel shot, and for

connecting other chain appendages as necessary.

1.2 Classification. The detachable links are of the following types, classes, and sizes as

specified (see 6.2):

Type I - Regular

Class 1 - Standard

Sizes:

1-7/8 inch; 2 inch; 2-1/8 inch; 2-1/4 inch; 2-3/8 inch; 2-1/2 inch; 2-5/8 inch;

2-3/4 inch; 2-7/8 inch; 3 inch; 3-1/8 inch; 3-1/4 inch; 3-3/8 inch; 3-1/2 inch;

3-5/8 inch; 3-3/4 inch; 3-7/8 inch; 4 inch; 4-3/4 inch

Class 2 - Heavy duty

Sizes:

2-3/4 inch; 3 inch; 3-1/2 inch

北极星标准文库-高清标准规范分享平台 www.bjxwk.com

MIL-DTL-2710C

Class 3 - High strength

Sizes:

3/4 inch; 7/8 inch; 1 inch; 1-1/8 inch; 1-1/4 inch; 1-1/2 inch; 1-3/8 inch;

1-5/8 inch; 1-3/4 inch

Type II - Pear-shaped

Sizes:

Number 2: 3/4 - 7/8 inches

Number 3: 1 - 1-1/8 inches

Number 4: 1-1/4 - 1-1/2 inches

Number 5: 1-5/8 - 2 inches

Number 6: 2-1/8 - 2-3/8 inches

Number 7: 2-1/2 - 3-1/8 inches

Number 8: 3-1/4 - 3-1/2 inches

1.3 Detachable link components. Detachable links consist of the following components

(see figure 1 and figure 2):

a. C-link.

b. Coupling plate - right hand.

c. Coupling plate - left hand.

d. Taper pin.

e. Hairpin (hairpin will be furnished only for detachable links used in an outboard

swivel shot (see 6.2)).

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3 and 4 of this

specification. This section does not include documents cited in other sections of this specification or

recommended for additional information or as examples. While every effort has been made to

ensure the completeness of this list, document users are cautioned that they must meet all specified

requirements of the documents cited in sections 3 and 4 of this specification, whether or not they are

listed.

2.2 Government documents.

2.2.1 Specifications and standards. The following specifications and standards form a

part of this document to the extent specified herein. Unless otherwise specified, the issues of

these documents are those cited in the solicitation or contract.

FEDERAL SPECIFICATION

VV-G-632 - Grease, Industrial, General Purpose

北极星标准文库-高清标准规范分享平台 www.bjxwk.com

MIL-DTL-2710C

FEDERAL STANDARD

FED-STD-595/27038 - Miscellaneous, Semigloss

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-DTL-24441/20 - Paint, Epoxy-Polyamide, Green Primer, Formula

150, Type III

MIL-PRF-24635 - Coating Systems, Weather-Resistant, Exterior Use

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-130 - Identification Marking of U.S. Military Property

MIL-STD-2035 - Nondestructive Testing Acceptance Criteria

(Copies of these documents are available online at https://assist.daps.dla.mil/ or from the

Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA

19111-5094.)

2.2.2 Other government drawings. The following other government drawings form a

part of this document to the extent specified herein. Unless otherwise specified, the issues are

those cited in the solicitation or contract.

DRAWINGS

NAVY

803-860062 - Links, Detachable, Standard and Heavy Duty

803-921790 - Links, Detachable High Strength

803-6397316 - Link, Detachable, Pear Shaped

804-840327 - Tool Boxes and Tools (Steel Box) for Assembling

and Disassembling Detachable Links

(Copies of these drawings are available from Commander, Naval Sea Systems Command, 1333

Isaac Hull Avenue SE, Washington Navy Yard, DC 20376-1080.

2.3 Non-government publications. The following documents form a part of this document

to the extent specified herein. Unless otherwise specified, the issues of these documents are those

cited in the solicitation or contract.

AMERICAN SOCIETY FOR QUALITY (ASQ)

ASQ Z1.4 - Sampling Procedures and Tables for Inspection by

Attributes

(Copies of this document are available online at http://www.asq.org/ or from American Society

of Quality, 600 North Plankinton Avenue, Milwaukee, WI 53203.)

北极星标准文库-高清标准规范分享平台 www.bjxwk.com

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #普通

摘要：

MIL-DTL-2710C-2010 是美国国防部制定的关于普通型和梨形可拆卸链节的详细军用规范标准，主要适用于链条连接元件的设计、材料、制造工艺及性能要求。该标准涵盖了两种主体形状：普通型（常规链节结构）与梨形（非对称椭圆形外观，便于快速连接与拆卸），并明确了链节的尺寸参数、抗拉强度、硬度及耐腐蚀性等关键指标。MIL-DTL-2710C 的发布旨在确保军用级可拆卸链节在极端环境下的可靠性与互换性，避免因连接件失效导致的设备故障或安全隐患。对于从事军工、重型机械、起重设备或船舶锚链行业的技术人员、采购工程师及质量检验人员而言，掌握该标准有助于精准选型、合规采购及通过军标验收，从而提升链传动系统的整体安全性与使用寿命。

展开>> 收起<<

MIL-DTL-2710C-2010 普通型和梨形可拆卸链节.pdf

共22页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

MIL-DTL-2710C-2010 普通型和梨形可拆卸链节

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: