BS EN 17415-1-2020 工厂预制钢制或塑料供水管、聚氨酯保温层和聚乙烯外壳组成的管道组件

VIP专免
史蒂文 2026-06-13 9 2.03MB 46 页 20星币
侵权投诉
BSI Standards Publication
District cooling pipes — Bonded single pipe
systems for directly buried cold water networks
Part 1: Factory made pipe assembly of steel or plastic service pipe,
polyurethane thermal insulation and a casing of polyethylene
BS EN 17415‑1:2020
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 17415-1
July 2020
ICS 23.040.99
English Version
District cooling pipes - Bonded single pipe systems for
directly buried cold water networks - Part 1: Factory made
pipe assembly of steel or plastic service pipe, polyurethane
thermal insulation and a casing of polyethylene
Réseaux d'eau glacée - Systèmes bloqués de tuyaux
pour les réseaux d'eau glacée enterrés directement -
Partie 1 : Assemblage de tube de service en acier ou en
matière plastique, isolation thermique en polyuréthane
et protection en polyéthylène
Fernkältesysteme - Verbundmantelrohrsysteme für
direkt erdverlegte Fernkältenetze - Teil 1: Werkmäßig
gedämmtes Verbund-Rohrsystem, bestehend aus Stahl
oder Plastik Mediumrohr, Polyurethan-
Wärmedämmung und einem Außenmantel aus
Polyethylen
This European Standard was approved by CEN on 22 June 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 17415-1:2020 E
National foreword
This British Standard is the UK implementation of EN 17415‑1:2020.
The UK participation in its preparation was entrusted to Technical
Committee RHE/9, Insulated underground pipelines.
A list of organizations represented on this committee can be obtained on
request to its committee manager.
This publication does not purport to include all the necessary provisions
of a contract. Users are responsible for its correct application.
© The British Standards Institution 2020
Published by BSI Standards Limited 2020
ISBN 978 0 539 04614 4
ICS 23.040.99
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 August 2020.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN 17415‑1:2020
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 17415-1
July 2020
ICS 23.040.99
English Version
District cooling pipes - Bonded single pipe systems for
directly buried cold water networks - Part 1: Factory made
pipe assembly of steel or plastic service pipe, polyurethane
thermal insulation and a casing of polyethylene
Réseaux d'eau glacée - Systèmes bloqués de tuyaux
pour les réseaux d'eau glacée enterrés directement -
Partie 1 : Assemblage de tube de service en acier ou en
matière plastique, isolation thermique en polyuréthane
et protection en polyéthylène
Fernkältesysteme - Verbundmantelrohrsysteme für
direkt erdverlegte Fernkältenetze - Teil 1: Werkmäßig
gedämmtes Verbund-Rohrsystem, bestehend aus Stahl
oder Plastik Mediumrohr, Polyurethan-
Wärmedämmung und einem Außenmantel aus
Polyethylen
This European Standard was approved by CEN on 22 June 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 17415-1:2020 E
BS EN 17415‑1:2020

标签： #钢 #管 #塑料

摘要：

BS EN 17415-1-2020 是欧洲标准，规定了工厂预制的钢制或塑料供水管道组件的技术要求，这些组件由聚氨酯保温层和聚乙烯外壳组成，主要用于区域供热或供冷系统。该标准涵盖了管道组件的材料、尺寸、制造工艺、性能测试以及安装指南，确保其在高温、高压和腐蚀性环境下的长期可靠性。通过严格的质量控制，BS EN 17415-1-2020 有助于提高能源效率、减少热损失、延长管道使用寿命，并降低维护成本。该标准适用于新建和改造项目，是工程设计师、制造商、施工单位以及市政规划人员的重要参考依据。遵循该

展开>> 收起<<
BS EN 17415-1-2020 工厂预制钢制或塑料供水管、聚氨酯保温层和聚乙烯外壳组成的管道组件.pdf

共46页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：史蒂文 分类：国际标准 价格：20星币 属性：46 页 大小：2.03MB 格式：PDF 时间：2026-06-13

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 46
评分 收藏
分享
立即下载 VIP免费下载
客服
关注