BS EN 17415-3-2021 用于钢或塑料供水管道、聚氨酯隔热层和聚乙烯外壳的工厂制造钢阀组件

VIP免费
史蒂文 2026-06-13 7 1.76MB 36 页 20星币
侵权投诉
BSI Standards Publication
District cooling pipes — Bonded single pipe
systems for directly buried cold water networks
Part 3: Factory made steel valve assembly for steel or plastic service
pipe, polyurethane thermal insulation and a casing of polyethylene
BS EN 17415‑3:2021
National foreword
This British Standard is the UK implementation of EN 17415‑3:2021.
The UK participation in its preparation was entrusted to Technical
Committee RHE/9, Insulated underground pipelines.
A list of organizations represented on this committee can be obtained on
request to its committee manager.
Contractual and legal considerations
This publication has been prepared in good faith, however no
representation, warranty, assurance or undertaking (express or
implied) is or will be made, and no responsibility or liability is or will be
accepted by BSI in relation to the adequacy, accuracy, completeness or
reasonableness of this publication. All and any such responsibility and
liability is expressly disclaimed to the full extent permitted by the law.
This publication is provided as is, and is to be used at the
recipient’s own risk.
The recipient is advised to consider seeking professional guidance with
respect to its use of this publication.
This publication is not intended to constitute a contract. Users are
responsible for its correct application.
© The British Standards Institution 2021
Published by BSI Standards Limited 2021
ISBN 978 0 539 13597 8
ICS 23.040.99
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 30 September 2021.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN 17415‑3:2021
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 17415‑3
September 2021
ICS 23.040.99
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN‑CENELEC Management Centre: Rue de la Science 23, B‑1040 Brussels
© 2021 CEN Ref. No. EN 17415‑3:2021: EAll rights of exploitation in any form and by any means reserved
worldwide for CEN national Members
District cooling pipes ‑ Bonded single pipe systems for
directly buried cold water networks ‑ Part 3: Factory
made steel valve assembly for steel or plastic service
pipe, polyurethane thermal insulation and a casing of
polyethylene
Réseaux d’eau glacée ‑ Systèmes bloqués de
tuyaux pour les réseaux d'eau glacée enterrés
directement — Partie 3 : Assemblages d'appareils
de robinetterie manufacturés pour tubes de service
en acier ou en plastique, isolation thermique en
polyuréthane et tube de protection en polyéthylène
Fernkälterohre ‑ Einzelrohr‑Verbundsysteme
für direkt erdverlegte Fernkältenetze ‑ Teil 3:
Werkmäßig gefertigte Stahl‑Absperrarmaturen
für Stahl‑ oder Kunststoff‑Mediumrohre,
einer Wärmedämmung aus Polyurethan und
einer Ummantelung aus Polyethylen
This European Standard was approved by CEN on 18 July 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
this European Standard the status of a national standard without any alteration. Up‑to‑date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN‑CENELEC Management Centre
or to any CEN member.



CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and United Kingdom.
English Version

标签： #钢 #阀 #管

摘要：

BS EN 17415-3-2021 是欧洲标准，专门针对用于钢或塑料供水管道系统的工厂制造钢阀组件进行规范，该组件采用聚氨酯隔热层和聚乙烯外壳。本文件详细规定了此类阀门组件的设计、材料、制造工艺、性能要求及测试方法，确保其在集中供热或供冷管网中的长期可靠性与能源效率。标准重点涵盖了隔热层的连续性和密封性、阀体与管道接头的机械强度以及外壳的耐腐蚀性能。通过遵循该标准，制造商能够提供符合国际质量预期的预保温阀门，从而简化现场安装流程，减少热损失，并提高整体管道系统的使用寿命。对于从事区域供能、市政

展开>> 收起<<
BS EN 17415-3-2021 用于钢或塑料供水管道、聚氨酯隔热层和聚乙烯外壳的工厂制造钢阀组件.pdf

共36页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：史蒂文 分类：国际标准 价格：20星币 属性：36 页 大小：1.76MB 格式：PDF 时间：2026-06-13

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 36
评分 收藏
分享
立即下载 VIP免费下载
客服
关注