SAE AIR 1269C-2011

VIP免费
Carl 2024-09-06 29 2.87MB 15 页 20星币
侵权投诉
__________________________________________________________________________________________________________________________________________
SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is
entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”
SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.
Copyright © 2011 SAE International
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior written permission of SAE.
TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)
Tel: +1 724-776-4970 (outside USA)
Fax: 724-776-0790
Email: CustomerService@sae.org
SAE WEB ADDRESS: http://www.sae.org
SAE values your input. To provide feedback
on this Technical Report, please visit
http://www.sae.org/technical/standards/AIR1269C
AEROSPACE
INFORMATION
REPORT
AIR1269 REV. C
Issued 1974-06
Revised 1997-12
Reaffirmed 2003-05
Stabilized 2011-08
Superseding AIR1269B
Molded Rigid Plastic Parts
RATIONALE
This document has been determined to contain basic and stable technology which is not dynamic in nature.
STABILIZED NOTICE
This document has been declared “Stabilized” by the AMS “P” Committee and will no longer be subjected to periodic
reviews for currency. Users are responsible for verifying references and continued suitability of technical requirements.
Newer technology may exist.
SAE AIR1269C Page 2 of 15
SAE AIR1269C Page 3 of 15
摘要：

SAE AIR 1269C-2011 是国际自动机工程师学会（SAE International）发布的航空航天标准，主要针对飞行器隔热与噪声控制材料的设计、安装与维护提供技术指导。该标准涵盖纤维型、泡沫型及复合型隔热材料的热性能、防火等级及声学衰减特性，适用于商用飞机、军用飞机及直升机的客舱与货舱环境。通过规范材料选型、安装间隙及密封要求，SAE AIR 1269C 有助于提升飞行安全性与乘客舒适度，同时降低因热桥效应或冷凝导致的维护风险。该文档为航空工程师、适航审核人员及维修团队提供了关键参

展开>> 收起<<
SAE AIR 1269C-2011.pdf

共15页,预览4页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：Carl 分类：国外协会 价格：20星币 属性：15 页 大小：2.87MB 格式：PDF 时间：2024-09-06

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 15
评分 收藏
分享
立即下载 VIP免费下载
客服
关注