ISO 13765-2-2004

VIP免费

阿拉丁 2024-09-09 8 175.61KB 10 页 12星币

侵权投诉

INTERNATIONAL

STANDARD ISO

13765-2

First edition

2004-06-01

Reference number

ISO 13765-2:2004(E)

Refractory mortars —

Part 2:

Determination of consistency using the

reciprocating flow table method

Mortiers réfractaires —

Partie 2: Détermination de la consistance par la méthode de la table

d'écoulement à mouvement alternatif

Reproduced by IHS under license with ISO

Not for Resale

No reproduction or networking permitted without license from IHS

--````,`-`-`,,`,,`,`,,`---

ISO 13765-2:2004(E)

PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall

not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.

Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the

unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.

ISO copyright office

Case postale 56 • CH-1211 Geneva 20

Tel. + 41 22 749 01 11

Fax + 41 22 749 09 47

E-mail copyright@iso.org

Web www.iso.org

Published in Switzerland

Reproduced by IHS under license with ISO

Not for Resale

No reproduction or networking permitted without license from IHS

--````,`-`-`,,`,,`,`,,`---

ISO 13765-2:2004(E)

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International

Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 13765-2 was prepared by Technical Committee ISO/TC 33, Refractories.

ISO 13765 consists of the following parts, under the general title Refractory mortars:

—Part 1: Determination of consistency using the penetrating cone method

—Part 2: Determination of consistency using the reciprocating flow table method

—Part 3: Determination of joint stability

—Part 4: Determination of flexural bonding strength

—Part 5: Determination of grain size distribution (sieve analysis)

—Part 6: Determination of moisture content of ready-mixed mortars

Reproduced by IHS under license with ISO

Not for Resale

No reproduction or networking permitted without license from IHS

--````,`-`-`,,`,,`,`,,`---

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #ISO

摘要：

本页面提供国际标准ISO 13765-2-2004《耐火泥浆第2部分：稠度测定方法》的完整中文解读与技术参考。该标准规范了用于砌筑耐火砖与衬里的耐火泥浆在施工现场及实验室条件下的稠度测试流程，包括样品制备、仪器要求及结果计算，旨在确保泥浆施工性能的一致性与工程质量。适用于钢铁、水泥、玻璃、陶瓷及有色金属等高温工业领域的质量检测人员、采购方及技术工程师。通过引用该标准，用户可有效验证耐火泥浆的泵送性与填充性，避免因稠度异常导致的衬里鼓包或脱落风险，从而提升窑炉使用寿命与安全生产水平。收藏本页可获

展开>> 收起<<

ISO 13765-2-2004.pdf

共10页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

ISO 13765-2-2004

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: