PIP STE02465-2019

VIP专免

Carl 2024-09-16 12 229.46KB 29 页 18星币

侵权投诉

COMPLETE REVISION

March 2019

Structural

PIP STE02465

Augered Cast-in-Place Piles Design Guide

PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES

In an effort to minimize the cost of process industry facilities, this Practice has been

prepared from the technical requirements in the existing standards of major industrial users,

contractors, or standards organizations. By harmonizing these technical requirements into a

single set of Practices, administrative, application, and engineering costs to both the

purchaser and the manufacturer should be reduced. While this Practice is expected to

incorporate the majority of requirements of most users, individual applications may involve

requirements that will be appended to and take precedence over this Practice. Determinations

concerning fitness for purpose and particular matters or application of the Practice to

particular project or engineering situations should not be made solely on information

contained in these materials. The use of trade names from time to time should not be viewed

as an expression of preference but rather recognized as normal usage in the trade. Other

brands having the same specifications are equally correct and may be substituted for those

named. All Practices or guidelines are intended to be consistent with applicable laws and

regulations including OSHA requirements. To the extent these Practices or guidelines should

conflict with OSHA or other applicable laws or regulations, such laws or regulations must be

followed. Consult an appropriate professional before applying or acting on any material

contained in or suggested by the Practice.

This Practice is subject to revision at any time.

Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies and

Subscribers may copy this Practice for their internal use. Changes or modifications of any kind

are not permitted within any PIP Practice without the express written authorization of PIP.

Authorized Users may attach addenda or overlays to clearly indicate modifications or

exceptions to specific sections of PIP Practices. Authorized Users may provide their clients,

suppliers and contractors with copies of the Practice solely for Authorized Users’ purposes.

These purposes include but are not limited to the procurement process (e.g., as attachments to

requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and

issue of design engineering deliverables for use on a specific project by Authorized User’s

client. PIP’s copyright notices must be clearly indicated and unequivocally incorporated in

documents where an Authorized User desires to provide any third party with copies of the

Practice.

PUBLISHING HISTORY

March 2005 Issued

February 2012 Complete Revision

March 2019 Complete Revision

Not printed with State funds

COMPLETE REVISION

March 2019

Structural

Process Industry Practices Page 1 of 27

PIP STE02465

Augered Cast-in-Place Piles Design Guide

Table of Contents

1. Scope ........................................... 2

2. References .................................. 2

2.1 Process Industry Practices ................ 2

2.2 Industry Codes and Standards .......... 2

2.3 Technical Papers ............................... 3

3. Definitions ................................... 3

4. General ........................................ 4

4.1 System Description ............................ 4

4.2 Design of ACIP Piles .......................... 5

5. Contract Documents ................... 7

5.1 Scope ................................................. 7

5.2 Design Drawings ................................ 8

5.3 Schedule and Submittal Review ........ 8

5.4 Geotechnical Report .......................... 8

5.5 Surveying ........................................... 9

5.6 Underground Utility Location .............. 9

5.7 Construction Permits .......................... 9

6. Specification Commentary ......... 9

6.1 Specification Scope ............................ 9

6.2 Specification Definitions ................... 10

6.3 Specification Quality

Control/Assurance ............................ 10

6.4 Specification Requirements ............. 10

6.5 Specification Inspection, Testing and

Acceptance ........................................ 22

7. Payment Guidelines .................. 26

7.1 Basis of Payment ............................. 26

7.2 Obstructions and Payment for

Obstructed Piles............................... 27

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

PIP STE02465-2019 是管道工业实践（PIP）发布的一项关键规范，专门针对碳钢无缝与焊接钢管的材料、制造、检验和测试要求。该标准适用于石油、化工及天然气等工业领域的压力管道系统，旨在统一设计、采购和施工中的材料选用与质量控制。文档涵盖了钢管化学成分、力学性能、尺寸公差、无损检测及标记要求，为工程人员提供明确的合规依据。遵循 PIP STE02465-2019 可有效提升管道系统的安全性与可靠性，减少因材料不符导致的工程风险。若您正在从事管道材料选型或项目文件编制，此标准是确保与国际

展开>> 收起<<

PIP STE02465-2019.pdf

共29页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

PIP STE02465-2019

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: