ANSI API Spec_5CRA-2010_2021

VIP免费

Carl 2024-08-26 11 847.89KB 97 页 14星币

侵权投诉

Specification for Corrosion-resistant

Alloy Seamless Tubes for Use as

Casing, Tubing, and Coupling Stock

ANSI/API SPECIFICATION 5CRA

FIRST EDITION, FEBRUARY 2010

EFFECTIVE DATE: AUGUST 1, 2010

ERRATA , AUGUST 2011

REAFFIRMED, JANUARY 2021

ISO 13680:2010 (Identical), Petroleum and natural

gas industries—Corrosion-resistant alloy seamless

tubes for use as casing, tubing, and coupling

stock—Technical delivery conditions

Special Notes

API publications necessarily address problems of a general nature. With respect to particular circumstances, local,

state, and federal laws and regulations should be reviewed.

Neither API nor any of API's employees, subcontractors, consultants, committees, or other assignees make any

warranty or representation, either express or implied, with respect to the accuracy, completeness, or usefulness of the

information contained herein, or assume any liability or responsibility for any use, or the results of such use, of any

information or process disclosed in this publication. Neither API nor any of API's employees, subcontractors,

consultants, or other assignees represent that use of this publication would not infringe upon privately owned rights.

Classified areas may vary depending on the location, conditions, equipment, and substances involved in any given

situation. Users of this specification should consult with the appropriate authorities having jurisdiction.

Users of this specification should not rely exclusively on the information contained in this document. Sound business,

scientific, engineering, and safety judgment should be used in employing the information contained herein.

API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to assure the

accuracy and reliability of the data contained in them; however, the Institute makes no representation, warranty, or

guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or

damage resulting from its use or for the violation of any authorities having jurisdiction with which this publication may

conflict.

API publications are published to facilitate the broad availability of proven, sound engineering and operating

practices. These publications are not intended to obviate the need for applying sound engineering judgment

regarding when and where these publications should be utilized. The formulation and publication of API publications

is not intended in any way to inhibit anyone from using any other practices.

Any manufacturer marking equipment or materials in conformance with the marking requirements of an API standard

is solely responsible for complying with all the applicable requirements of that standard. API does not represent,

warrant, or guarantee that such products do in fact conform to the applicable API standard.

electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact the

Publisher, API Publishing Services, 200 Massachusetts Avenue, NW, Suite 1100, Washington, DC 20001.

API Foreword

Nothing contained in any API publication is to be construed as granting any right, by implication or otherwise, for the

manufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should anything

contained in the publication be construed as insuring anyone against liability for infringement of letters patent.

This document was produced under API standardization procedures that ensure appropriate notification and

participation in the developmental process and is designated as an API standard. Questions concerning the

interpretation of the content of this publication or comments and questions concerning the procedures under which

this publication was developed should be directed in writing to the Director of Standards, American Petroleum

Institute, 200 Massachusetts Avenue, NW, Suite 1100, Washington, DC 20001. Requests for permission to

reproduce or translate all or any part of the material published herein should also be addressed to the director.

Shall: As used in a standard, “shall” denotes a minimum requirement in order to conform to the specification.

Should: As used in a standard, “should” denotes a recommendation or that which is advised but not required in order

to conform to the specification.

Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years. A one-time

extension of up to two years may be added to this review cycle. Status of the publication can be ascertained from the

API Standards Department, telephone (202) 682-8000. A catalog of API publications and materials is published

annually by API, 200 Massachusetts Avenue, NW, Suite 1100, Washington, DC 20001.

Suggested revisions are invited and should be submitted to the Standards Department, API, 200 Massachusetts

Avenue, NW, Suite 1100, Washington, DC 20001, standards@api.org.

iii

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

ANSI API Spec_5CRA-2010_2021 是美国石油学会（API）发布的针对耐腐蚀合金（Corrosion-Resistant Alloy）无缝与焊接套管、油管及接箍料的国际规范标准，该标准在2010年首次发布后于2021年进行了确认或修订更新，旨在为酸性油气井、高硫化氢与二氧化碳环境下的管材提供严格的化学成分、力学性能、热处理及尺寸公差要求，确保产品在极端腐蚀工况下的长期可靠性和安全服役。作为全球石油天然气行业采购与检验的核心依据之一，该标准对于追求高效防腐与合规质量的企业具有

展开>> 收起<<

ANSI API Spec_5CRA-2010_2021.pdf

共97页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

ANSI API Spec_5CRA-2010_2021

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: