BS EN 10210-2-2019

VIP免费
阿拉丁 2024-09-16 36 2.03MB 46 页 18星币
侵权投诉
BSI Standards Publication
WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06
Hot finished steel structural hollow sections
Part 2: Tolerances, dimensions and sectional properties
BS EN 10210-2:2019
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 10210-2
May 2019
ICS 77.140.75 Supersedes EN 10210-2:2006
English Version
Hot finished steel structural hollow sections - Part 2:
Tolerances, dimensions and sectional properties
Profils creux de construction finis à chaud en aciers -
Partie 2 : Tolérances, dimensions et caractéristiques de
section
Warmgefertigte Hohlprofile für den Stahlbau - Teil 2:
Grenzabmaße, Maße und statische Werte
This European Standard was approved by CEN on 20 March 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 10210-2:2019 E
National foreword
This British Standard is the UK implementation of EN 10210-2:2019. It
supersedes BS EN 10210-2:2006, which is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee ISE/103, Structural Steels Other Than Reinforcements.
A list of organizations represented on this committee can be obtained on
request to its secretary.
The UK committee draws users’ attention to the fact that EN 10210-
2:2006 is included in the normative references of BS EN 10210-1:2006.
Furthermore, at the time of publication of this standard, EN 10210-



users that when a standard is included in the normative references of a


users should continue to refer to EN 10210-2:2006 for CE marking


For further information, see www.ec.europa.eu/growth/single-market/
european-standards/harmonised-standards/construction-products_en.
This publication does not purport to include all the necessary provisions
of a contract. Users are responsible for its correct application.
© The British Standards Institution 2019

ISBN 978 0 580 92191 9
ICS 77.140.75
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the

Amendments/corrigenda issued since publication
 Text affected

BS EN 10210-2:2019
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 10210-2
May 2019
ICS 77.140.75 Supersedes EN 10210-2:2006
English Version
Hot finished steel structural hollow sections - Part 2:
Tolerances, dimensions and sectional properties
Profils creux de construction finis à chaud en aciers -
Partie 2 : Tolérances, dimensions et caractéristiques de
section
Warmgefertigte Hohlprofile für den Stahlbau - Teil 2:
Grenzabmaße, Maße und statische Werte
This European Standard was approved by CEN on 20 March 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 10210-2:2019 E
BS EN 10210-2:2019
摘要：

BS EN 10210-2-2019 是欧洲标准化委员会发布的一项关键标准，专门针对热加工结构用空心型材的尺寸、外形和重量公差进行了详细规定。该标准是 BS EN 10210 系列的第二部分，与第一部分（技术交货条件）配套使用，适用于圆形、方形和矩形截面的无缝或焊接热加工空心型材。内容涵盖了从外径、壁厚、直线度、扭转度到端部切割和理论重量计算等核心公差要求，为建筑结构、桥梁、机械制造等领域的工程设计、质量检验和国际贸易提供了统一的技术依据。对于从事钢结构设计、工程采购或质量控制的专业人员而言，掌

展开>> 收起<<
BS EN 10210-2-2019.pdf

共46页,预览4页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：阿拉丁 分类：国际标准 价格：18星币 属性：46 页 大小：2.03MB 格式：PDF 时间：2024-09-16

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 46
评分 收藏
分享
立即下载 VIP免费下载
客服
关注