法国标准 NF EN ISO 11403-2-2004 (EN)

VIP免费

乔大爷开音响 2025-03-04 15 240.72KB 16 页 10星币

侵权投诉

FE119771 ISSN 0335-3931

NF EN ISO 11403-2

August 2004

Classification index: T 50-064-2

European standard

French standard

Published and distributed by Association Française de Normalisation (AFNOR — French standard institute) — 11, avenue Francis de Pressensé —

93571 Saint-Denis La Plaine Cedex — Tel.: + 33 (0)1 41 62 80 00 — Fax: + 33 (0)1 49 17 90 00 — www.afnor.fr

ICS: 83.080.01

Plastics

Acquisition and presentation

of comparable multipoint data

Part 2: Thermal and processing properties

F : Plastiques — Acquisition et présentation de données multiples comparables —

Partie 2 : Propriétés thermiques et caractéristiques relatives à la mise en œuvre

D : Kunststoffe — Ermittlung und Darstellung von vergleichbaren

Vielpunktennwerten — Teil 2: Thermische und Verarbeitungseigenschaften

French standard approved

by decision of the Director General of AFNOR on July 20, 2004 taking effect on

August 20, 2004.

It replaces the approved standard NF EN ISO 11403-2 dated October 1999.

Correspondence The European standard EN ISO 11403-2:2004 has the status of French standard. It

reproduces in full the international standard ISO 11403-2:2004.

Analysis This document specifies operational test regimes in view to acquire and present

multiple data relating to certain thermal properties of plastics and certain

characteristics relating to their processing.

Descriptors Technical International Thesaurus: plastics, data, tests, specimen preparation,

viscosity, data display.

Modifications With respect to the replaced document, revision of the ISO standard.

Corrections

INTRANORMES pour : ALSTOM TRANSPORT

NF EN ISO 11403-2:2004 — 2 —

National foreword

References to French standards

The correspondence between the standards figuring in the clause "Normative references" and the identical French

standards is as follows:

ISO 291 : NF EN ISO 291 (classification index: T 51-014)

ISO 293 : NF EN ISO 293 (classification index: T 58-003)

ISO 294-1 : NF EN ISO 294-1 (classification index: T 51-294-1)

ISO 295 : NF EN ISO 295 (classification index: T 58-005)

ISO 1133 : NF EN ISO 1133 (classification index: T 51-038)

ISO 2818 : NF EN ISO 2818 (classification index: T 58-001)

ISO 3167 : NF EN ISO 3167 (classification index: T 58-004)

ISO 10724-1 : NF EN ISO 10724-1 (classification index: T 51-713-1)

The correspondence between the standards figuring in the clause "Normative references" and French standards

having the same scope, but which are not identical, is as follows:

ISO 11357-3 : XP T 51-507-3

The other standards mentioned in the clause "Normative references" that do not have any correspondence in the

collection of French standards are as follows (they may be obtained from AFNOR):

ISO 11359-2

ISO 11443

INTRANORMES pour : ALSTOM TRANSPORT

EUROPEAN STANDARD

NORME EUROPÉENNE

EUROPÄISCHE NORM

EN ISO 11403-2

March 2004

ICS 83.080.01 Supersedes EN ISO 11403-2:1999

English version

Plastics - Acquisition and presentation of comparable multipoint

data - Part 2: Thermal and processing properties

(ISO 11403-2:2004)

Plastiques - Acquisition et présentation de données

multiples comparables - Partie 2: Propriétés thermiques

et caractéristiques relatives à la mise en oeuvre

(ISO 11403-2:2004)

Kunststoffe - Ermittlung und Darstellung von

vergleichbaren Vielpunktkennwerten - Teil 2: Thermische

und Verarbeitungseigenschaften

(ISO 11403-2:2004)

This European Standard was approved by CEN on 1 March 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,

Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36 B-1050 Brussels

worldwide for CEN national Members. Ref. No. EN ISO 11403-2:2004 E

INTRANORMES pour : ALSTOM TRANSPORT

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #ISO

摘要：

该文档为标准规范《法国标准 NF EN ISO 11403-2-2004 (EN)》，主要规定了塑料材料在指定条件下的多点数据获取与表述方法，特别针对热机械性能与力学性能的测试数据进行标准化。该标准等同采用国际标准ISO 11403-2:2004，适用于工程塑料与通用塑料的研发、质量控制及选材比对，旨在统一不同实验室间的数据格式，提高数据的可比性与可重复性。内容涵盖蠕变、应力松弛、疲劳及长期热老化等关键性能的测试要求与数据处理规范，是塑料行业工程师、质检人员及科研机构进行材料性能评估与数据库建设

展开>> 收起<<

法国标准 NF EN ISO 11403-2-2004 (EN).pdf

共16页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

法国标准 NF EN ISO 11403-2-2004 (EN)

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: