BS EN 1097-6-2022 骨料机械和物理性能测试 颗粒密度和吸水率的测定

VIP专免
史蒂文 2026-02-10 13 3.53MB 64 页 18星币
侵权投诉
BSI Standards Publication
Tests for mechanical and physical
properties of aggregates
Part 6: Determination of particle density and water absorption
BS EN 1097‑6:2022
北极星标准文库-高清标准规范分享平台 www.bjxwk.com
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 1097-6
February 2022
ICS 91.100.15 Supersedes EN 1097-6:2013
English Version
Tests for mechanical and physical properties of aggregates
- Part 6: Determination of particle density and water
absorption
Essais pour déterminer les caractéristiques
mécaniques et physiques des granulats - Partie 6 :
Détermination de la masse volumique et du coefficient
d'absorption d'eau
Prüfverfahren für mechanische und physikalische
Eigenschaften von Gesteinskörnungen - Teil 6:
Bestimmung der Korndichte und der Wasseraufnahme
This European Standard was approved by CEN on 12 December 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 1097-6:2022 E
National foreword
This British Standard is the UK implementation of EN 1097‑6:2022. It
supersedes BS EN 1097‑6:2013, which is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee B/502/6, Test methods.
A list of organizations represented on this committee can be obtained on
request to its committee manager.
Contractual and legal considerations
This publication has been prepared in good faith, however no
representation, warranty, assurance or undertaking (express or
implied) is or will be made, and no responsibility or liability is or will be
accepted by BSI in relation to the adequacy, accuracy, completeness or
reasonableness of this publication. All and any such responsibility and
liability is expressly disclaimed to the full extent permitted by the law.
This publication is provided as is, and is to be used at the
recipient’s own risk.
The recipient is advised to consider seeking professional guidance with
respect to its use of this publication.
This publication is not intended to constitute a contract. Users are
responsible for its correct application.
© The British Standards Institution 2022
Published by BSI Standards Limited 2022
ISBN 978 0 539 04123 1
ICS 91.100.15
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 March 2022.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN 1097‑6:2022
北极星标准文库-高清标准规范分享平台 www.bjxwk.com
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 1097-6
February 2022
ICS 91.100.15 Supersedes EN 1097-6:2013
English Version
Tests for mechanical and physical properties of aggregates
- Part 6: Determination of particle density and water
absorption
Essais pour déterminer les caractéristiques
mécaniques et physiques des granulats - Partie 6 :
Détermination de la masse volumique et du coefficient
d'absorption d'eau
Prüfverfahren für mechanische und physikalische
Eigenschaften von Gesteinskörnungen - Teil 6:
Bestimmung der Korndichte und der Wasseraufnahme
This European Standard was approved by CEN on 12 December 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 1097-6:2022 E
BS EN 1097‑6:2022
北极星标准文库-高清标准规范分享平台 www.bjxwk.com

标签： #机械 #测定 #性能测试

摘要：

BS EN 1097-6-2022 是欧洲标准中关于骨料机械和物理性能测试的重要规范，专门用于测定骨料的颗粒密度和吸水率。该标准替代了旧版BS EN 1097-6:2013，为建筑、道路工程及混凝土生产行业提供了统一的测试方法，确保骨料质量评估的准确性和可比性。通过测定骨料在干燥、饱和面干及表观状态下的密度，以及其吸水率，该标准帮助工程师和质检人员判断骨料的孔隙率、耐久性及其对混凝土配合比设计的影响。文档详细描述了试验步骤、设备要求、计算公式及结果表达方式，适用于天然骨料、再生骨料及人造骨料等多

展开>> 收起<<
BS EN 1097-6-2022 骨料机械和物理性能测试 颗粒密度和吸水率的测定.pdf

共64页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：史蒂文 分类：国际标准 价格：18星币 属性：64 页 大小：3.53MB 格式：PDF 时间：2026-02-10

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 64
评分 收藏
分享
立即下载 VIP免费下载
客服
关注