SSPC-SP 2-2024 手动工具清洁 Hand Tool Cleaning

VIP免费

公子舒夜 2026-06-18 32 184.39KB 8 页 20星币

SSPC-SP 2-2024

Revised December 2, 2024

Hand Tool Cleaning

reproduced, stored in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording,

or otherwise) without the prior written permission of AMPP.

SSPC-SP 2-2024

Hand Tool Cleaning

This AMPP standard represents a consensus of those individual members who have reviewed this document, its scope,

and provisions. Its acceptance does not in any respect preclude anyone, whether he or she has adopted the standard

or not, from manufacturing, marketing purchasing, or using products, processes, or procedures not in conformance

with this standard. Nothing contained in this AMPP standard is to be construed as granting any right, by implication or

otherwise, to manufacture, sell, or use in connection with any method, apparatus, or product covered by Letters Patent,

or as indemnifying or protecting anyone against liability for infringement of Letters Patent. This standard represents

minimum requirements and should in no way be interpreted as a restriction on the use of better procedures or materials.

Neither is this standard intended to apply in all cases relating to the subject. Unpredictable circumstances may negate

the usefulness of this standard in specic instances. AMPP assumes no responsibility for the interpretation or use of

this standard by other parties and accepts responsibility for only those ofcial AMPP interpretations issued by AMPP

in accordance with its governing procedures and policies which preclude the issuance of interpretations by individual

volunteers.

Users of this AMPP standard are responsible for reviewing appropriate health, safety, environmental, and regulatory

documents and for determining their applicability in relation to this standard prior to its use. This AMPP standard may

not necessarily address all potential health and safety problems, or environmental hazards associated with the use of

materials, equipment, and/or operations detailed or referred to within this standard. Users of this AMPP standard are

also responsible for establishing appropriate health, safety, and environmental protection practices, in consultation with

appropriate regulatory authorities, if necessary, to achieve compliance with any existing applicable regulatory require-

ments prior to the use of this standard.

CAUTIONARY NOTICE: AMPP standards are subject to periodic review and may be revised or withdrawn at any time

in accordance with AMPP technical committee procedures. AMPP requires that action be taken to reafrm, revise, or

withdraw this standard no later than ve years from the date of initial publication and subsequently from the date of each

reafrmation or revision. The user is cautioned to obtain the latest edition. Purchasers of AMPP standards may receive

current information on all standards and other AMPP/NACE/SSPC publications by contacting AMPP Customer Sup-

port, 15835 Park Ten Place, Houston, Texas 77084-5145 (Tel: +1-281-228-6200, email: customersupport@ampp.org).

Document History:

2024-12-02: Revised by AMPP Standards Committee (SC) 05, Surface Preparation

2018-01-02: Revised by SSPC Power Tool Cleaning Committee

2008-01-03: Revised by SSPC Power Tool Cleaning Committee Revision

2004-11-04: Editorial Revisions

2000-09-01: Editorial Revisions

1984-11-01: Editorial Revisions

1982-11-01: Revised by SSPC Power Tool Cleaning Committee

1963-10-01: Revised by SSPC Power Tool Cleaning Committee

1952-08-01: Developed by SSPC Power Tool Cleaning Committee

AMPP values your input. To provide feedback on this standard, please contact standards@ampp.org

SSPC-SP 2-2024

Hand Tool Cleaning

Foreword, Rationale ........................................................................................................................................................4

Referenced Standards and Other Consensus Documents .............................................................................................4

Section 1 Scope ........................................................................................................................................................4

Section 2 Denitions .................................................................................................................................................5

Section 3 Requirements for Prepared Surface .........................................................................................................5

Section 4 Additional Technical Considerations .........................................................................................................5

Section 5 Tools and Methods for Hand Tool Cleaning ..............................................................................................5

Section 6 Procedures Prior to Hand Tool Cleaning ...................................................................................................6

Section 7 Procedures Following Hand Tool Cleaning and Immediately Prior to Coating ..........................................6

Other Referenced Documents .........................................................................................................................................6

Appendix A Notes (Nonmandatory) .............................................................................................................................. 7

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #SPC #SSPC

摘要：

SSPC-SP 2-2024 是国际表面处理标准中关于手动工具清洁的最新修订版，规定了使用钢丝刷、刮刀、砂纸或打磨工具等非动力设备，去除钢材表面松散锈蚀、旧涂层及污染物的方法与验收要求。该标准适用于无法采用喷砂或动力工具清洁的现场维修或受限空间作业，明确清洁等级需通过目视检查确认无可见油污、松散氧化皮及涂层残留，但不涉及基材表面的彻底锚纹处理。采用 SSPC-SP 2-2024 规程可帮助施工方在简化操作的同时保障涂层附着力基础，是工业防腐维护中低成本且有效的预处理方案。

展开>> 收起<<

SSPC-SP 2-2024 手动工具清洁 Hand Tool Cleaning.pdf

共8页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

SSPC-SP 2-2024 手动工具清洁 Hand Tool Cleaning

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: