SAE AS81824F-2025 连接电气压接铜环境耐受

VIP专享

史蒂文 2026-07-24 21 295.15KB 23 页 32星币

__________________________________________________________________________________________________________________________________________

SAE Executive Standards Committee Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is

entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”

SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and

suggestions.

recording, or otherwise, or used for text and data mining, AI training, or similar technologies, without the prior written permission of SAE.

TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)

Tel: +1 724-776-4970 (outside USA)

Fax: 724-776-0790

Email: CustomerService@sae.org

SAE WEB ADDRESS: http://www.sae.org

For more information on this standard, visit

https://www.sae.org/standards/content/AS81824F/

AEROSPACE

STANDARD

AS81824™

REV. F

Issued 1998-08

Reaffirmed 2024-01

Revised 2025-10

Superseding AS81824E

Splice, Electric, Crimp, Copper, Environment Resistant

FSC 5940

RATIONALE

Addition of new detail specification; editorial corrections from Five-Year Review of the document for clarifications and format

correction.

1. SCOPE

The AS81824 specification covers environment-resistant, permanent crimp type splices having heat shrinkable insulating

sleeve and meltable environmental seals or heatless sealing sleeves. The splices may be used with tin, nickel, and

silver-plated conductors in applications where the total temperature of the splice application does not exceed 200 °C or as

specified in the detail specification.

1.1 The splice is designed to accommodate single and multiple wire combinations in one or more sealant openings. See

detail specifications for guidance.

2. REFERENCES

2.1 Applicable Documents

The following publications form a part of this document to the extent specified herein. The latest issue of SAE publications

shall apply. The applicable issue of other publications shall be the issue in effect on the date of the purchase order. In the

event of conflict between the text of this document and references cited herein, the text of this document takes precedence.

Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been

obtained.

2.1.1 SAE Publications

Available from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel: 877-606-7323 (U.S. and

Canada only) or +1 724-776-4970 (Outside U.S. and Canada), www.sae.org.

AMS1424 Fluid, Aircraft Deicing/Anti-Icing, SAE Type 1

AMS-QQ-N-290 Nickel Plating (Electrodeposited)

AIR1351 Manufacturers’ Identification of Aerospace Electrical and Electronic Wiring Devices and Accessories

AS7928 Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For

SAE INTERNATIONAL AS81824™F Page 2 of 23

AS22520 Crimping Tools, Wire Termination, General Specification For

AS22759 Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy

AS22759/11 Wire, Electrical, Fluoropolymer-Insulated, Extruded TFE, Silver-Coated, Copper Conductor, 600 Volt,

ROHS

AS22759/12 Wire, Electrical, Fluoropolymer-Insulated, Extruded TFE, Nickel-Coated, Copper Conductor, 600 Volt,

ROHS

AS23053 Insulation Sleeving, Electrical, Heat Shrinkable, General Specification For

AS50861 Wire, Electric, Polyvinyl Chloride Insulated, Copper or Copper Alloy

AS81044 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated,

Copper or Copper Alloy

*AS81824/1 Splice, In-Line, Electric, Crimp, SN/CU, Environmental, Heat-Shrinkable Sleeve (150 °C), 1 x 1 Sealing

Opening

*AS81824/3 Splice, Coaxial Cable, Electric, Permanent, Crimp and Solder Style Copper, Insulated, Environment

Resistant, 150 °C

*AS81824/4 Splices, Electric, Permanent, Crimp Style, Copper, Insulated, Environment Resistant, Splice, Shield,

Solder Type, Insulated, 150 °C

*AS81824/5 Splices, Electric, Permanent, Crimp/Solder Style, Copper, Insulated, Environment Resistant, Kit,

Shielded Cable, 150 °C

*AS81824/6 Splice, Electric, Permanent, Crimp, Nickel Plated Insulated Wires, Environmental Class 1, 175 °C

*AS81824/7 Splice, In-Line, Electric, Crimp, SN/CU, Environmental, Heat-Shrinkable Sleeve (150 °C), 1 x 3 Sealant

Opening

*AS81824/8 Splice, In-Line, Electric, Crimp, NI/CU, Environmental, Heat-Shrinkable Sleeve (175 °C), 1 x 3 Sealant

Opening

*AS81824/9 Splice, In-Line, Electric, Crimp, SN/CU, Environmental, Heat-Shrinkable Sleeve (150 °C), 3 x 3 Sealant

Opening

*AS81824/10 Splice, In-Line, Electric, Crimp, NI/CU, Environmental, Heat-Shrinkable Sleeve (175 °C), 3 x 3 Sealant

Opening

*AS81824/11 Splice, Electric, Permanent, Crimp Style, NI/CU, Insulated, Environment Resistant, Class 1, 200 °C

Max, 1x1 Sealant Opening

*AS81824/12 Splice, Electric, Permanent, Crimp Style, Tin-Coated Copper, Insulated, Environment Resistant,

Class 1, 150 °C, Heatless Sealing

*AS81824/13 Splice, Stub, Electric, Permanent, Crimp Style, Nickel/Copper, Insulated, Environment Resistant,

175 °C Max

SAE INTERNATIONAL AS81824™F Page 3 of 23

*AS81824/14 Splice, Electric, Permanent, Crimp Style, Nickel-Coated Copper, Insulated, Environment Resistant,

Class 1, 175 °C, Heatless Sealing

*AS81824/15 Splices, Electric, Permanent, Crimp Style, Copper, Insulated, Flexible, 150 °C, Environment Resistant,

Splice Pack, Shielded Cable, Class I

*AS81824/16 Splices, Electric, Permanent, Crimp Style, Copper, Insulated, Flexible, 200 C, Environment Resistant,

Splice Pack, Shielded Cable, Class I

*AS81824 detail specifications

2.1.2 ASQ Publications

Available from American Society for Quality, 600 North Plankinton Avenue, Milwaukee, WI 53203, Tel: 800-248-1946

(United States or Canada) or +1-414-272-8575 (all other locations), www.asq.org.

ANSI/ASQ Z1.4 Sampling Procedures and Tables for Inspection by Attributes

2.1.3 ASTM Publications

Available from ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,

Tel: 610-832-9500, www.astm.org.

ASTM B1 Wire, Copper, Hard-Drawn

ASTM B75/B75M Tube, Seamless Copper

ASTM B152/B152M Copper Sheet, Strip, Plate, and Rolled Bar

ASTM B272 Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)

ASTM B280 Tube, Copper, Seamless, for Air Conditioning and Refrigeration Field Service

ASTM B339 Standard Specification for Pig Tin

ASTM B545 Tin, Electrodeposited Coatings of

ASTM D1974/D1974M Fiberboard Boxes, Methods of Closing, Sealing, and Reinforcing, Standard Practice for

ASTM D2671 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use

ASTM D5118/D5118M Standard Practice for Fabrication of Fiberboard Shipping Boxes

ASTM D5486/D5486M Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing

2.1.4 ISO and IEC Publications

Available from International Organization for Standardization, ISO Central Secretariat, Chemin de Blandonnet 8, CP 401,

1214 Vernier, Geneva, Switzerland, Tel: +41 22 749 01 11, www.iso.org/store.

Available from IEC Secretariat, 3 rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland, Tel: +41 22 919 0211,

www.iec.ch.

ISO/IEC 17025 General Requirements for the Competence of Testing and Calibration Laboratories

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载

标签： #电气 #环境

摘要：

SAE AS81824F-2025 标准规范详细规定了用于航空与航天电气系统的铜导体压接连接器在严苛环境下的性能要求与测试方法，涵盖温度循环、盐雾腐蚀、振动与湿热耐受等关键指标，确保连接器在高温、高湿及化学暴露等恶劣工况中仍能保持稳定的电气导通与机械强度。本文档适用于设计、采购及质量检验人员，作为选型与认证依据，以提升线束连接的长期可靠性并降低维护风险。

展开>> 收起<<

SAE AS81824F-2025 连接电气压接铜环境耐受.pdf

共23页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

SAE AS81824F-2025 连接电气压接铜环境耐受

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

SAE AS81824F-2025 连接 电气 压接 铜 环境耐受

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

SAE AS81824F-2025 连接电气压接铜环境耐受