ANSI AWWA D108-19 蓄水设施的铝制圆顶屋顶 2019

VIP免费

那山那人那狗 2026-07-31 14 965.41KB 32 页 22星币

侵权投诉

ANSI/AWWA D108-19

(Revision of ANSI/AWWA D108-10)

AWWA Standard

Aluminum Dome

Roofs for Water

Storage Facilities

Effective date: Nov. 1, 2019.

First edition approved by AWWA Board of Directors Jan. 17, 2010.

This edition approved June 7, 2019.

Approved by American National Standards Institute June 11, 2019.

AWWA Standard

This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards

describe minimum requirements and do not contain all of the engineering and administrative information normally

contained in specifications. The AWWA standards usually contain options that must be evaluated by the user of

the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA

publication of a standard does not constitute endorsement of any product or product type, nor does AWWA test, certify,

or approve any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take

precedence over or displace any applicable law, regulation, or code of any governmental authority. AWWA standards

are intended to represent a consensus of the water industry that the product described will provide satisfactory service.

When AWWA revises or withdraws this standard, an official notice of action will be placed in the Official Notice section

of Journal AWWA. The action becomes effective on the first day of the month following the month of Journal AWWA

publication of the official notice.

American National Standard

An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An

American National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The

existence of an American National Standard does not in any respect preclude anyone, whether that person has approved

the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not

conforming to the standard. American National Standards are subject to periodic review, and users are cautioned to obtain

the latest editions. Producers of goods made in conformity with an American National Standard are encouraged to state

on their own responsibility in advertising and promotional materials or on tags or labels that the goods are produced in

conformity with particular American National Standards.

Caution Notice: The American National Standards Institute (ANSI) approval date on the front cover of this standard indicates

completion of the ANSI approval process. This American National Standard may be revised or withdrawn at any time.

ANSI procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from

the date of ANSI approval. Purchasers of American National Standards may receive current information on all standards

by calling or writing the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036;

(212) 642-4900, or emailing info@ansi.org.

ISBN-13, print: 978-1-62576-354-9 ISBN-13, electronic: 978-1-61300-524-8

DOI: doi.org/10.12999/AWWA.D108.19

electronic or mechanical, including scanning, recording, or any information or retrieval system. Reproduction and

commercial use of this material is prohibited, except with written permission from the publisher.

Printed in USA

reproduced or transmitted in any form or by any means,

electronic or mechanical, including scanning, recording, or any

information or retrieval system. Reproduction and commercial

use of this material is prohibited, except with written permission

from the publisher. Please send any requests or questions to

permissions@awwa.org.

iii

Committee Personnel

The Standards Subcommittee on Aluminum Dome Roofs, which developed this standard, had

the following personnel at the time:

Tim D. Hopper, Chair

T.W. Bloomer II, Murraysmith, San Diego, Calif.

T.D. Hopper, Tank Connection Affiliate Group, Lindale, Tex.

M.P. Parker, Statewide Aquastore Inc., East Syracuse, N.Y.

D.R. Pyewell, Tanco Engineering Inc., Loveland, Colo.

G.R. Stein, Tank Industry Consultants, Indianapolis, Ind.

C.M. Wilburn, CST Industries Inc., Conroe, Tex.

The AWWA Standards Committee on Steel and Composite Water Storage Tanks, which reviewed

and approved this standard, had the following personnel at the time of approval:

Gregory R. Stein, Chair

General Interest Members

D.M. Algranti, Albert A. Webb Associates, Riverside, Calif.

J.W. Birkhoff, Birkhoff, Hendricks & Carter LLP, Dallas, Tex.

J.D. Brock, Consulting Services Logistics, Toledo, Ohio

M.M. Coleman,* Standards Council Liaison, Wade Trim Associates Inc., Detroit, Mich.

E. Darrimon, Bay Area Coating Consultants Inc., Denair, Calif.

W.J. Dixon, Dixon Engineering Inc., Lake Odessa, Mich.

R.E. Gell, O’Brien & Gere Engineers Inc., Syracuse, N.Y.

M.L. Hickey, Murraysmith, Portland, Ore.

F.S. Kurtz,* Standards Engineer Liaison, AWWA, Denver, Colo.

R. Perez, Greeley and Hansen, Indianapolis, Ind.

L.D. Scott,† Tank Industry Consultants, Atascadero, Calif.

G.R. Stein, Tank Industry Consultants, Indianapolis, Ind.

J.I. Strand, CBS Squared Inc., Chippewa Falls, Wis.

T.A. Tovey, Jacobs Engineering, Portland, Ore.

* Liaison, nonvoting

† Alternate

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #屋顶

摘要：

ANSI AWWA D108-19 是针对蓄水设施中铝制圆顶屋顶的设计、制造与安装的权威标准，由美国自来水厂协会（AWWA）发布，并于2019年更新。该标准为工程技术人员提供了结构载荷、材料性能、防腐处理、节点连接、抗风与抗震设计及现场安装质量控制的完整技术规范。铝制圆顶屋顶因其轻质、耐腐蚀、维护成本低及跨度大等优势，广泛用于饮用水、污水及工业蓄水池的封闭与防护。D108-19 特别强调了在长期使用环境下铝材的疲劳强度与焊接工艺要求，并明确了与 AWWA D100（钢制水塔）及 D107（复合结

展开>> 收起<<

ANSI AWWA D108-19 蓄水设施的铝制圆顶屋顶 2019.pdf

共32页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

ANSI AWWA D108-19 蓄水设施的铝制圆顶屋顶 2019

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: