美国军用标准 MIL-DTL-55181E 连接器、插头和插座、中等功率（电气、防水）、MW 型、通用规范

VIP专免

standardshare 2026-08-09 8 197.12KB 24 页 25星币

侵权投诉

MIL-DTL-55181E

INCH-POUND

10 March 2008

SUPERSEDING

MIL-DTL-55181D

12 June 2003

DETAIL SPECIFICATION

CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER

(ELECTRICAL, WATERPROOF), TYPE MW,

GENERAL SPECIFICATION FOR

This specification is approved for use by all Departments and Agencies of the Department of Defense.

1. SCOPE.

1.1 Scope. This specification covers a series of center-lock coupling screw, waterproof, polarized, multi-

contact, intermediate power connectors for interconnection of power and control circuits on electronic

equipment (see 6.1).

1.2 Classification.

1.2.1 Part or Identifying Number (PIN). The PIN consists of the letter M, the basic specification number,

a forward slash, the specification sheet number, a dash, and a number for the cable size accommodation,

when applicable (see 3.1) as shown in the following example:

M 55181/ 1 - 01

Cable size accommodation

(

see 1.2.2

)

Specification sheet number

M prefix

Basic s

ecification

1.2.2 Cable size accommodation. When applicable, the cable size accommodation is indicated by a

number assigned in a specific specification sheet.

Comments, suggestions, or questions on this document should be addressed to: Commander,

Defense Supply Center Columbus, Attn: VAI, P.O. Box 3990, Columbus, Ohio, 43218-3990 or

emailed to RectangularConnector@dla.mil. Since contact information can change, you may

want to verify the currency of this address information using the ASSIST Online database at

http://assist.daps.dla.mil.

AMSC N/A FSC 5935

MIL-DTL-55181E

2. APPLICABLE DOCUMENTS.

2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this

specification. This section does not include documents cited in other sections of this specification or

recommended for additional information or as examples. While every effort has been made to ensure the

completeness of this list, document users are cautioned that they must meet all specified requirements

documents cited in sections 3, 4, or 5, of this specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications standards, and handbooks. The following specifications, standards, and

handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the

issues of these documents are those cited in the solicitation or contract.

FEDERAL STANDARDS

FED-STD-H28 - Screw-Thread Standards for Federal Services.

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-202 - Electronic and Electrical Component Parts.

MIL-STD-790 - Established Reliability and High Reliability Qualified Products List

(QPL) Systems For Electrical, Electronic, and Fiber Optic Parts

Specifications

MIL-STD-810 - Environmental Engineering Considerations and Laboratory Tests.

MIL-STD-889 - Dissimilar Metals.

MIL-STD-1285 - Marking of Electrical and Electronic Parts.

(See supplement 1 for list of specification sheets.)

(Copies of these documents are available online at http://assist.daps.dla.mil/quicksearch/ or

http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue,

Building 4D, Philadelphia, PA 19111-5094.)

2.2.2 Other Government documents, drawings, and publications. The following other Government

documents, drawings, and publications form a part of this document to the extent specified herein. Unless

otherwise specified, the issues of these documents are those cited in the solicitation or contract.

DRAWINGS

ELECTRONIC COMMAND

SC-A-46439 - List of Accessories for Package Tester.

(Unless otherwise indicated, copies of the above specifications, standards, and drawings required by

suppliers in connection with specific procurement functions should be obtained from the procuring activity

or as directed by the procuring activity or as directed by the contracting officer. Both the title and number

or symbol should be stipulated when requesting copies.)

MIL-DTL-55181E

2.3 Non-Government publications. The following documents form a part of this document to the extent

specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

ASTM INTERNATIONAL

ASTM A582/A582M - Bars, Free Machining Stainless Steel

ASTM B16/B16M - Rod, Bar, Free Cutting, Bar and Shapes for use in Screw Machines

ASTM B139/B139M - Rod, Phosphor Bronze, Bar, and Shapes

ASTM B194 - Copper-Beryllium Alloy, Plate, Sheet, Strip, and Rolled Bar

ASTM B196/B196M - Rod and Bar, Copper-Beryllium Alloy

ASTM B487 - Measurement of Metal and Oxide Coating Thickness by Microscopical

Examination of a Cross Section

ASTM B488 - Gold for Engineering Uses, Electrodeposited Coatings of

ASTM B567 - Measurement of Coating Thickness by the Beta Backscatter Method

ASTM B568 - Measurement of Coating Thickness by X-Ray Spectrometry

ASTM B748 - Measurement of Thickness of Metallic Coatings by Measurement of Cross

Section with a Scanning Electron Microscope

ASTM D2000 - Rubber Products in Automotive Applications

ASTM D5948 - Compounds, Molding, Thermosetting

(Copies of these documents are available from http://www.astm.org/ or ASTM International, 100 Barr

Harbor Drive, PO Box C700, West Conshohocken, Pennsylvania, USA 19428-2959.)

ELECTRONIC INDUSTRIES ALLIANCE (EIA)

EIA-364 - Electrical Connector/Socket Test Procedures Including Environmental

Classifications

EIA-364-09 - Connectors and Contacts, Electrical, Durability Test Procedure for

EIA-364-20 - Connectors, Sockets and Coaxial Contacts, Electrical, Withstanding

Voltage, Test Procedures for

EIA-364-21 - Insulation Resistance Test Procedure for Electrical Connectors,

Sockets, and Coaxial Contacts

EIA-364-26 - Connectors, Contacts and Sockets, Electrical, Salt Spray Test

Procedure for

EIA-364-28 - Connectors and Sockets, Electrical, Vibration Test Procedure for

EIA-364-29 - Contact Retention Test Procedure for Electrical Connectors

EIA-364-31 - Connectors and Sockets, Electrical, Humidity Test Procedure for

EIA-364-32 - Connectors and Sockets, Thermal Shock (Temperature Cycling), Test

Procedure for

(Copies of these documents are available online at http://www.eia.org or from the Electronic Industries

Alliance, Technology Strategy & Standards Department, 2500 Wilson Boulevard, Arlington, VA 22201.)

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)

ISO 10012-1 - Equipment, Quality Assurance Requirements for Measuring – Part 1:

Metrological Confirmation System for Measuring Equipment.

(Copies of these documents are available online at http://www.iso.ch or from the International

Organization for Standardization American National Standards Institute, 11 West 42nd Street, 13th Floor,

New York, NY 10036.)

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #中等 #电气 #插头

摘要：

本页面详细介绍美国军用标准MIL-DTL-55181E，该规范适用于MW型中等功率电气防水连接器，包括插头和插座的设计、性能、测试及验收要求。MIL-DTL-55181E连接器采用防水结构设计，适用于潮湿、雨淋、冲洗及水下等严苛环境，确保电气连接的可靠性和安全性。该规范覆盖了连接器的材料、镀层、机械强度、绝缘电阻、介电耐压、接触电阻、密封性能、温度循环、振动冲击及盐雾腐蚀等关键指标，并对插拔力、耐久性和线缆密封方式提出明确要求。产品广泛应用于军用车辆、舰船、航空地面设备、野外通信系统及其他需要中

展开>> 收起<<

美国军用标准 MIL-DTL-55181E 连接器、插头和插座、中等功率（电气、防水）、MW 型、通用规范.pdf

共24页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

美国军用标准 MIL-DTL-55181E 连接器、插头和插座、中等功率（电气、防水）、MW 型、通用规范

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: