美国军用标准 MIL-DTL-81748E 技术手册快速行动变更和临时快速行动变更；准备；通用规范（取代 MIL-DTL-81748D）（SS 由 MIL-DTL-81905E 替代）

VIP专免

standardshare 2026-08-09 22 651.08KB 27 页 25星币

侵权投诉

SENSITIV

NOT MEASUREMENT

MIL-DTL-81748E(AS)

10 December 2004

SUPERSEDING

MIL-DTL-81748D(AS)

15 December 1995

DETAIL SPECIFICATION

MANUALS, TECHNICAL: RAPID ACTION CHANGES AND INTERIM RAPID ACTION

CHANGES; PREPARATION OF; GENERAL SPECIFICATION FOR

This specification is approved for use by the Naval Air Systems Command, and is available for

use by all Departments and Agencies of the Department of Defense.

1. SCOPE

1.1 Scope. This specification covers the requirements for the preparation of Rapid

Action Changes (RACs) and Interim Rapid Action Changes (IRACs) to Technical Manuals

(TMs) under the cognizance of the Naval Air Systems Command (NAVAIRSYSCOM) (see

6.1.1, 6.1.2, and 6.1.3 for information pertaining to applicability, exceptions, and exclusions).

1.2 Classification. Rapid Action Changes to Technical Manuals covered by this

specification shall be of the following types:

a. RAC - issued by Naval activities or Contract Administrative Offices (CAOs) as a

complete formal change to a TM (including all associated front matter).

b. IRAC - issued by Naval activities or Contract Administrative Offices (CAOs) as an

interim change to provide urgent TM change data.

Comments, suggestions, or questions on this document should be addressed to: Commander,

Naval Air Systems Command, Code 49100B120-3 Highway 547, Lakehurst, NJ. 08733-5100 or

emailed to thomas.omara@navy.mil. Since contact information can change, you may want to

verify the currency of this address information using the ASSIST Online database at

http://assist.daps.dla.mil/.

AMSC N/A AREA TMSS

MIL-DTL-81748E(AS)

(1) Type A IRAC – issued as a Naval Message to provide urgent TM change

data, with the exception of graphic images, schematics, wiring diagrams, etc., which are not for

delivery by Naval Message.

(2) Type B IRAC – issued as hard copy or digital file to provide urgent TM

changes for schematics, wiring diagrams, or other graphic images, which are not for delivery by

Naval Message. Only the technical content change information is to be provided. The manual

title page and front matter are not to be included. Type B IRACs are preceded with a Naval

Message Release Notification.

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3 and 4 of this

specification. This section does not include documents cited in other sections of this

specification or recommended for additional information or as examples. While every effort has

been made to ensure the completeness of this list, document users are cautioned that they must

meet all specified requirements of documents cited in sections 3 and 4 of this specification,

whether or not they are listed.

2.2 Government Documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards,

and handbooks form a part of this document to the extent specified herein. Unless otherwise

specified, the issues of these documents are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-DTL-23618 - Manuals, Technical: Periodic Maintenance

Requirements, Preparation of

MIL-DTL-81927 - Manuals, Technical: Work Package Style,

Format, and Common Technical Content

Requirements; General Specification for (Work

Package Concept)

MIL-M-85337 - Manuals, Technical: Quality Assurance Program,

Requirements for

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-38784 - Standard Practice for Manuals, Technical:

General Style and Format Requirements

DEPARTMENT OF DEFENSE HANDBOOKS

MIL-HDBK- 38790 - Printing Production of Technical Manuals

(Copies of these documents are available online at http://assist.daps.dla.mil/quicksearch/

or http://assist.daps.dla.mil/or from the Standardization Document Order Desk, 700 Robbins

Avenue, Building 4D, Philadelphia, PA 19111-5094.)

MIL-DTL-81748E(AS)

2.2.2 Other government documents, drawings, and publications. The following other

government documents, drawings, and publications form a part of this document to the extent

specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

NAVAL PUBLICATIONS

NTP 3 (J) - Naval Telecommunication Procedures,

Telecommunications Users Manual

(Copies of this document are available from the Commander, Naval Computer and

Telecommunications Command, N31, 4401 Massachusetts Avenue N.W., Washington, D.C.

20394-5460 or online at http://www.nctsw.navy.mil/ .)

NAVAL AIR SYSTEMS COMMAND

NAVAIR 00-25-100 - Naval Air Systems Command Technical Manual

Program

(Copies of this document are available from the Commanding Officer (ATTN: 3.3 ) Naval Air

Technical Data and Engineering Service Command (NATEC), NAS North Island, Bldg 90,

P.O.Box 357031, San Diego, CA. 92135-7031, or online at https://www.natec.navy.mil/ .)

2.3 Order of Precedence. In the event of a conflict between the text of this document and

the references cited herein, the text of this document takes precedence. Nothing in this

document, however, supersedes applicable laws and regulations unless a specific exemption has

been obtained.

3. REQUIREMENTS

3.1 Approved conditions for issuance of RACs or IRACs. RACs and IRACs shall be

developed to expedite the issuance of technical information when one or more of the following

conditions exist:

a. Hazards to safety of personnel (see 6.4.4);

b. Impairment of safety of flight (see 6.4.5);

c. Aircraft grounding (see 6.4.1);

d. Mission capability or fleet readiness (see 6.4.6);

e. Equipment damage (see 6.4.3), or

f. Environmental impact restrictions (see 6.4.2).

3.2 Conditions not approved for issuance of RACs and IRACs. A RAC or IRAC shall

not be issued for the following:

a. Update of data pertaining to hardware familiarization, such as: theory of operation;

description of an existing unit or control unless required in conjunction with revised installation,

assembly, disassembly, or maintenance procedures;

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

本文档为美国军用标准MIL-DTL-81748E技术手册，规定了快速行动变更和临时快速行动变更的编制、格式与通用要求，适用于军事装备技术资料的修订与发布流程。该标准取代了旧版MIL-DTL-81748D，对变更内容的准备、编号、审批及分发提出了统一规范，旨在确保技术手册在紧急情况下能快速、准确地更新，保障作战与维护人员获取最新有效信息。值得注意的是，该标准现已被MIL-DTL-81905E替代，但了解其内容对于追溯技术手册历史版本、处理在役装备遗留文件及理解军事标准化演变仍有重要参考价值。本规范

展开>> 收起<<

美国军用标准 MIL-DTL-81748E 技术手册快速行动变更和临时快速行动变更；准备；通用规范（取代 MIL-DTL-81748D）（SS 由 MIL-DTL-81905E 替代）.pdf

共27页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

美国军用标准 MIL-DTL-81748E 技术手册快速行动变更和临时快速行动变更；准备；通用规范（取代 MIL-DTL-81748D）（SS 由 MIL-DTL-81905E 替代）

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

美国军用标准 MIL-DTL-81748E 技术手册 快速行动变更和临时快速行动变更；准备；通用规范（取代 MIL-DTL-81748D）（SS 由 MIL-DTL-81905E 替代）

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

美国军用标准 MIL-DTL-81748E 技术手册快速行动变更和临时快速行动变更；准备；通用规范（取代 MIL-DTL-81748D）（SS 由 MIL-DTL-81905E 替代）