美国军用标准 MIL-DTL-81748E_AMENDMENT-3 连接器、电气、圆形、微型、高密度、快速断开（卡口式、螺纹式和后膛式）、耐环境、可拆卸压接和密封焊接触点通用规范

VIP专免

standardshare 2026-08-09 19 541.42KB 25 页 25星币

侵权投诉

MIL-DTL-81748E(AS)

w/AMENDMENT 3

20 February 2015

SUPERSEDING

MIL-DTL-81748E(AS)

w/AMENDMENT 2

12 February 2009

DETAIL SPECIFICATION

MANUALS, TECHNICAL: RAPID ACTION CHANGES AND INTERIM RAPID ACTION

CHANGES; PREPARATION OF; GENERAL SPECIFICATION FOR

This specification is approved for use by the Naval Air Systems Command, and is available for

use by all Departments and Agencies of the Department of Defense.

1. SCOPE

1.1 Scope. This specification covers the requirements for the preparation of Rapid

Action Changes (RACs) and Interim Rapid Action Changes (IRACs) to Technical Manuals

(TMs) under the cognizance of the Naval Air Systems Command (NAVAIRSYSCOM) (see

6.1.1, 6.1.2, and 6.1.3 for information pertaining to applicability, exceptions, and exclusions).

RACs and IRACs are processed using the Joint Deficiency Reporting System (JDRS) website

(http://www.jdrs.mil.). Address requests for waiver or deviation from this policy to the Product

Data Competency, COMNAVAIRSYSCOM (AIR-6.8.5) in accordance with NAVAIR 00-25-

604.

1.2 Classification. Rapid Action Changes to Technical Manuals covered by this

specification are of the following types:

a. RAC - issued by Naval activities or Contract Administrative Offices (CAOs) as a

complete formal change to a TM (including all associated front matter).

b. IRAC - issued by Naval activities or Contract Administrative Offices (CAOs) as an

interim change to provide urgent TM change data.

AMSC N/A AREA TMSS

Comments, suggestions, or questions on this document should be addressed to: Commander, Naval

Air Systems Command, Code 412000B120-3 Highway 547, Joint Base MDL, NJ 08733-5100 or

emailed to michael.sikora@navy.mil. Since contact information can change, you may want to verify

the currency of this address information using the ASSIST Online database at https://assist.dla.mil.

NOT MEASUREMENT

SENSITIVE

MIL-DTL-81748E(AS)

w/AMENDMENT 3

(1) Type A IRAC – issued as a Naval Message to provide urgent TM change

data, with the exception of graphic images, schematics, wiring diagrams, etc., which are not for

delivery by Naval Message.

(2) Type B IRAC – issued as urgent TM change data that cannot be released as a

Naval Message, e.g., changes to schematics, wiring diagrams, graphic images, or other

information which may only be conveyed through the release of replacement pages or added

pages prepared in the same style and format as the existing TM. Only the technical content

change information is to be provided. The manual title page and front matter are not to be

included.

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3 and 4 of this

specification. This section does not include documents cited in other sections of this

specification or recommended for additional information or as examples. While every effort has

been made to ensure the completeness of this list, document users are cautioned that they must

meet all specified requirements of documents cited in sections 3 and 4 of this specification,

whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards,

and handbooks form a part of this document to the extent specified herein. Unless otherwise

specified, the issues of these documents are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-DTL-23618

Manuals, Technical: Periodic Maintenance

Requirements, Preparation of

MIL-DTL-81927

Manuals, Technical: Work Package Style,

Format, and Common Technical Content

Requirements; General Specification for (Work

Package Concept)

MIL-PRF-85337

Manuals, Technical: Quality Assurance Program,

Requirements for

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-38784

Manuals, Technical: General Style and Format

Requirements

DELETED HANDBOOK

(Copies of these documents are available online at http://quicksearch.dla.mil.)

2.2.2 Other Government documents, drawings, and publications. The following other

government documents, drawings, and publications form a part of this document to the extent

MIL-DTL-81748E(AS)

w/AMENDMENT 3

specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

NAVAL PUBLICATIONS

NTP 3 (J)

Naval Telecommunication Procedures,

Telecommunications Users Manual

(Copies of this document are available online at https://ndls.nwdc.navy.mil.)

NAVAL AIR SYSTEMS COMMAND

NAVAIR 00-25-100

Naval Air Systems Command Technical Manual

Program

NAVAIR 00-25-604

Naval Air Systems Command Fleet

Support/Integrated Program Team Acquisition

and Sustainment of NAVAIR Technical Manuals

(Copies of these documents are available with an account at https://mynatec.navair.navy.mil.)

2.3 Order of precedence. Unless otherwise noted herein or in the contract, in the event

of a conflict between the text of this document and the references cited herein, the text of this

document takes precedence. Nothing in this document, however, supersedes applicable laws and

regulations unless a specific exemption has been obtained.

3. REQUIREMENTS

3.1 Approved conditions for issuance of RACs or IRACs. RACs and IRACs shall be

developed to expedite the issuance of technical information when one or more of the following

conditions exist:

a. Hazards to safety of personnel (see 6.4.4);

b. Impairment of safety of flight (see 6.4.5);

c. Aircraft grounding (see 6.4.1);

d. Mission capability or fleet readiness (see 6.4.6);

e. Equipment damage (see 6.4.3), or

f. Environmental impact restrictions (see 6.4.2).

3.2 Conditions not approved for issuance of RACs and IRACs. A RAC or IRAC shall

not be issued for the following:

a. Update of data pertaining to hardware familiarization, such as: theory of operation;

description of an existing unit or control unless required in conjunction with revised installation,

assembly, disassembly, or maintenance procedures;

b. Format changes;

c. Grammatical changes (unless safety, equipment damage, flight limitation, etc, are

involved);

d. Typographical errors;

e. General non-procedural information;

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #焊接 #电气 #环境

摘要：

美国军用标准MIL-DTL-81748E第3次修订版（AMENDMENT-3）规定了圆形、微型、高密度电气连接器的通用规范，涵盖卡口式、螺纹式和后膛式快速断开结构，适用于耐环境应用场景。该标准详细定义了可拆卸压接触点和密封焊接触点的性能要求、材料、尺寸、测试方法及质量保证条款，确保连接器在极端温度、振动、冲击和湿热等恶劣环境下具有高可靠性和互操作性。此规范广泛应用于航空航天、舰船、地面车辆及电子装备中的信号和电力传输系统，为设计、采购和验收提供统一技术依据。修订版更新了部分测试条件，增强了接触件

展开>> 收起<<

美国军用标准 MIL-DTL-81748E_AMENDMENT-3 连接器、电气、圆形、微型、高密度、快速断开（卡口式、螺纹式和后膛式）、耐环境、可拆卸压接和密封焊接触点通用规范.pdf

共25页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

美国军用标准 MIL-DTL-81748E_AMENDMENT-3 连接器、电气、圆形、微型、高密度、快速断开（卡口式、螺纹式和后膛式）、耐环境、可拆卸压接和密封焊接触点通用规范

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

美国军用标准 MIL-DTL-81748E_AMENDMENT-3 连接器、电气、圆形、微型、高密度、快速断开（卡口式、螺纹式和后膛式）、耐环境、可拆卸压接和密封焊接触点 通用规范

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择:

美国军用标准 MIL-DTL-81748E_AMENDMENT-3 连接器、电气、圆形、微型、高密度、快速断开（卡口式、螺纹式和后膛式）、耐环境、可拆卸压接和密封焊接触点通用规范