沙特阿美公司材料系统规范 29-SAMSS-014 消防部门及腰短款上衣 2017 Fire Protection Department Hip Length Jacket

VIP专免

标准之家 2026-09-13 8 123.54KB 7 页 25星币

侵权投诉

Previous Issue: 28 November 2011 Next Planned Update: 17 December 2020

Page 1 of 7

Contact: Bander Saad Al-Ghamdi (ghambs0c) on phone +966-13-8767917

Materials System Specification

29-SAMSS-014 17 December 2017

Fire Protection Department Hip Length Jacket

Document Responsibility: Fire Protection Standards Committee

Contents

1 Scope ............................................................2

2 Conflicts and Deviations..................................2

3 References ....................................................2

4 Material and Manufacturing Requirements .......3

5 Pattern Specifications, Sizes,

and Stock Numbers ........................................6

6 Inspection ......................................................6

Revision Summary................................................6

Attachment A - Shoulder Logo Patch .....................7

Document Responsibility: Fire Protection Standards Committee 29-SAMSS-014

Issue Date: 17 December 2017

Next Planned Update: 17 December 2020 Fire Protection Department Hip Length Jacket

Saudi Aramco: Company General Use

Page 2 of 7

1 Scope

This specification together with the Purchase Order covers the minimum requirements

for hip length outer wear-jacket that is used by Fire Protection Department personnel.

Jackets to this specification are stocked by size under SAP material numbers

1000217504, 1000217505, 1000217506, 1000217508, 1000217543, and 1000217544.

2 Conflicts and Deviations

2.1 Any conflicts between this document and other applicable Mandatory Saudi

Aramco Engineering Requirements (MSAERs) shall be addressed to the

EK&RD Coordinator.

2.2 Any deviation from the requirements herein shall follow internal company

procedure SAEP-302.

2.3 If conflicts or deviations arise between this specification and other Purchase

Order documents not specifically covered as exceptions by the Purchase Order,

the Buyer shall be consulted and a ruling shall be obtained by the manufacturer

in writing before work proceeds. Fire Protection Department reserves the right

to review, test, and reject any manufacturer's uniform jacket before acceptance.

3 References

References listed below are a part of this specification to the extent specified herein and

shall be of the latest edition, addendum, or revision in effect on the date of the Purchase

Order unless otherwise stated.

3.1 Saudi Aramco References

Saudi Aramco Engineering Procedure

SAEP-302 Instructions for Obtaining a Waiver of a Mandatory

Saudi Aramco Engineering Requirement

Saudi Aramco Inspection Requirements

Form 175 Inspection Requirements

3.2 Federal Standards

FED STD 751a Stitches, Seams, and Stitchings

Document Responsibility: Fire Protection Standards Committee 29-SAMSS-014

Issue Date: 17 December 2017

Next Planned Update: 17 December 2020 Fire Protection Department Hip Length Jacket

Saudi Aramco: Company General Use

Page 3 of 7

4 Material and Manufacturing Requirements

4.1 Color

The color will be Paris blue with samples to be provided by Fire Protection

Department.

4.2 Shell Fabric

65% Polyester and 35% combed cotton with high thread count specification

20 x 20 / 98 x 48 tropical weave with durable water repellent finish.

4.3 Body Lining

The lining fabric is a high-count poplin fabric 45 x 45 x 110 x 70 - 58 quilted to

226.8 gm (8 oz) reprocessed acrylic and other fibers - 3.5" x 3.5" quilting.

Additional detachable lining as attached with zip #5, made out of Deluxe fur,

#9010H Blue acrylic fiber with pile length 10 mm, to give cozy and comfortable

warmth. All the edges are securely sewn down.

4.4 Sleeves

The sleeves are secured to the body of the jacket by means of morrow stitch

with a safety stitch to properly strengthen the seam. The same seam is used for

the side closing seams as well.

4.5 Cuffs

Round coat cuff with elasticized fabric grip hidden inside for better protection.

4.6 Collar and Cap

Stand collar with hood attachment. The cap can be hidden inside the collar with

zip closer. Collar length 445 mm (17.5 in), width 90 mm (3.5 in), having strip

with Velcro closer for additional wind protection.

4.7 Pocket

Two large chest patch pockets with pointed flaps 152 mm (6 in) deep, 5.5 inch

wide (140 mm). There is a pencil stitch in the right side of the left pocket

32 mm (1-¼ in) wide, both pockets are to have a 30 mm (1.1 in) box pleat

stitched at top and bottom to prevent spreading. An additional pocket, the same

size as the chest pockets is to be stitched to the inner left side of the Deluxe fur.

Pocket lining is of heavy weight drill. All pocket corners to have heavy duty bar

tacking for extra reinforcement.

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #消防 #MS #材料

摘要：

本页面围绕沙特阿美公司材料系统规范 29-SAMSS-014《消防部门及腰短款上衣》（Fire Protection Department Hip Length Jacket）2017版展开，系统介绍 Saudi Aramco Materials System Specification 29-SAMSS-014 对消防部门及腰短款消防夹克的技术要求，包括材料、阻燃与热防护性能、反光标识、尺寸、缝制、标签、检验、测试方法和质量保证等内容，适用于消防装备采购、供应商制造、安全合规、质量检验及工程技

展开>> 收起<<

沙特阿美公司材料系统规范 29-SAMSS-014 消防部门及腰短款上衣 2017 Fire Protection Department Hip Length Jacket.pdf

共7页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

沙特阿美公司材料系统规范 29-SAMSS-014 消防部门及腰短款上衣 2017 Fire Protection Department Hip Length Jacket

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: