API SPEC 15LR-2001(2026) 7TH ED (E1) (E2) 低压玻璃纤维管线管和配件规范

VIP免费

那山那人那狗 2026-09-13 12 461.88KB 31 页 26星币

侵权投诉

Specification For Low Pressure

Fiberglass Line Pipe and Fittings

API SPECIFICATION 15LR

SEVENTH EDITION, AUGUST 2001

EFFECTIVE DATE: FEBRUARY 1, 2002

ERRATA 1, JUNE 2018

ERRATA 2, APRIL 2021

REAFFIRMED, APRIL 2026

SPECIAL NOTES

API publications necessarily address problems of a general nature. With respect to partic-

ular circumstances, local, state, and federal laws and regulations should be reviewed.

API is not undertaking to meet the duties of employers, manufacturers, or suppliers to

warn and properly train and equip their employees, and others exposed, concerning health

and safety risks and precautions, nor undertaking their obligations under local, state, or fed-

eral laws.

Information concerning safety and health risks and proper precautions with respect to par-

ticular materials and conditions should be obtained from the employer, the manufacturer or

supplier of that material, or the material safety data sheet.

Nothing contained in any API publication is to be construed as granting any right, by

implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or prod-

uct covered by letters patent. Neither should anything contained in the publication be con-

strued as insuring anyone against liability for infringement of letters patent.

Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least

every five years. Sometimes a one-time extension of up to two years will be added to this

review cycle. This publication will no longer be in effect five years after its publication date

as an operative API standard or, where an extension has been granted, upon republication.

Status of the publication can be ascertained from the API Upstream Segment [telephone

(202) 682-8000]. A catalog of API publications and materials is published annually and

updated quarterly by API, 200 Massachusetts Avenue, NW, Suite 1100, Washington, DC

20001.

This document was produced under API standardization procedures that ensure appropri-

ate notification and participation in the developmental process and is designated as an API

standard. Questions concerning the interpretation of the content of this standard or com-

ments and questions concerning the procedures under which this standard was developed

should be directed in writing to the standardization manager, American Petroleum Institute,

200 Massachusetts Avenue, NW, Suite 1100, Washington, DC 20001. Requests for permis-

sion to reproduce or translate all or any part of the material published herein should also be

addressed to the general manager.

API standards are published to facilitate the broad availability of proven, sound engineer-

ing and operating practices. These standards are not intended to obviate the need for apply-

ing sound engineering judgment regarding when and where these standards should be

utilized. The formulation and publication of API standards is not intended in any way to

inhibit anyone from using any other practices.

Any manufacturer marking equipment or materials in conformance with the marking

requirements of an API standard is solely responsible for complying with all the applicable

requirements of that standard. API does not represent, warrant, or guarantee that such prod-

ucts do in fact conform to the applicable API standard.

transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise,

without prior written permission from the publisher. Contact the Publisher,

API Publishing Services, 200 Massachusetts Avenue, NW, Suite 1100,

Washington, DC 20001.

FOREWORD

a. This specification is under the jurisdiction of the American Petroleum Institute Subcom-

mittee on Fiberglass and Plastic Tubulars.

b. The purpose of this specification is to provide standards for low pressure fiberglass line

pipe and fittings for use in conveying produced fluids including oil, gas, nonpotable water

and mixtures thereof in the oil and gas producing industries.

c. Nothing in this specification should be interpreted as indicating a preference by the com-

mittee for any material or process or as indicating equality between the various materials or

processes. In the selection of materials and processes, the purchaser must be guided by his

experience and by the service for which the pipe is intended.

d. API publications may be used by anyone desiring to do so. Every effort has been made by

the Institute to assure the accuracy and reliability of the data contained in them; however, the

Institute makes no representation, warranty, or guarantee in connection with this publication

and hereby expressly disclaims any liability or responsibility for loss or damage resulting

from its use or for the violation of any federal, state, or municipal regulation with which this

publication may conflict.

e. This Standard shall become effective on the date printed on the cover but may be used

voluntarily from the date of distribution.

f. Appendix F, "Marking Requirements for Monogram Licensees," has been intentionally

removed. See API Specification Q1 (Annex A) or the API website for information pertain-

ing to the API Monogram Program and use of the API Monogram on applicable products.

g. Suggested revisions are invited and should be submitted to the standardization manager,

American Petroleum Institute, 200 Massachusetts Avenue, NW, Suite 1100, Washington,

DC 20001.

Attention Users of this Publication: Portions of this publication have been changed from

the previous edition. In some cases the changes are significant, while in other cases the

changes reflect minor editorial adjustments. Since the document was significantly re-for-

matted from the previous edition, no attempt was made to indicate the location of changes

with bar notations.

iii

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

标签： #配件 #管 #纤维

摘要：

API SPEC 15LR-2001(2026) 7TH ED (E1) (E2)《低压玻璃纤维管线管和配件规范》是面向低压玻璃纤维管线管及管件的重要技术标准，系统规定产品的材料、设计、尺寸、性能、制造、检验、试验、标识与质量要求，适用于石油、天然气、化工、水处理等腐蚀性流体输送场景，帮助工程师、采购、质检和运维人员完成选型、采购、施工验收与合规审查，并提升项目文件编制和技术对照效率。

展开>> 收起<<

API SPEC 15LR-2001(2026) 7TH ED (E1) (E2) 低压玻璃纤维管线管和配件规范.pdf

共31页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

API SPEC 15LR-2001(2026) 7TH ED (E1) (E2) 低压玻璃纤维管线管和配件规范

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: