IEEE Std C57.12.01-2020

VIP免费

Carl 2024-09-06 54 1.39MB 49 页 18星币

侵权投诉

IEEE Standard for General

Requirements for Dry-Type

Distribuon and Power Transformers

IEEE Std C57.12.01™-2020

(Revision of IEEE Std C57.12.01-2015)

IEEE Power and Energy Society

Developed by the

Transformers Commiee

STANDARDS

Authorized licensed use limited to: University of Gothenburg. Downloaded on December 20,2020 at 23:32:17 UTC from IEEE Xplore. Restrictions apply.

IEEE Std C57.12.01™-2020

(Revision of IEEE Std C57.12.01-2015)

IEEE Standard for General

Requirements for Dry-Type

Distribution and Power Transformers

Developed by the

Transformers Committee

of the

IEEE Power and Energy Society

Approved 24 September 2020

IEEE SA Standards Board

Authorized licensed use limited to: University of Gothenburg. Downloaded on December 20,2020 at 23:32:17 UTC from IEEE Xplore. Restrictions apply.

Abstract: Electrical, mechanical, and safety requirements of ventilated, non-ventilated, and sealed

dry-type distribution and power transformers or autotransformers (single and polyphase, with a

voltage of 601 V or higher in the highest voltage winding) are described in this standard.

Keywords: autotransformer, dry-type distribution, IEEE C57.12.01, power transformer, voltage

winding

The Institute of Electrical and Electronics Engineers, Inc.

3 Park Avenue, New York, NY 10016-5997, USA

IEEE is a registered trademark in the U.S. Patent & Trademark Oce, owned by The Institute of Electrical and Electronics Engineers,

Incorporated.

National Electrical Code and NEC are both registered trademarks of the National Fire Protection Association, Inc.

PDF: ISBN 978-1-5044-7038-4 STD24398

Print: ISBN 978-1-5044-7039-1 STDPD24398

IEEE prohibits discrimination, harassment, and bullying.

For more information, visit https:// www .ieee .org/ web/ aboutus/ whatis/ policies/ p9 -26 .html.

No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission

of the publisher.

Authorized licensed use limited to: University of Gothenburg. Downloaded on December 20,2020 at 23:32:17 UTC from IEEE Xplore. Restrictions apply.

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

IEEE Std C57.12.01-2020是由IEEE发布的关于干式变压器电气、机械及热性能要求的最新标准规范，全称为《IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers》。该标准规定了额定电压不超过34.5 kV、容量不超过10 MVA的干式变压器的通用设计要求、绝缘等级、温升限制、短路承受能力、声音水平以及试验方法等内容，适用于室内及室外安装的干式配电变压器和电力变

展开>> 收起<<

IEEE Std C57.12.01-2020.pdf

共49页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

IEEE Std C57.12.01-2020

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: