IEEE Std C57.13-2016

VIP免费

Carl 2024-09-06 51 3.83MB 96 页 18星币

侵权投诉

IEEE Standard Requirements for

Instrument Transformers

Sponsored by the

Transformers Committee

IEEE

3 Park Avenue

New York, NY 10016-5997

USA

IEEE Power and Energy Society

IEEE Std C57.13™-2016

(Revision of

IEEE Std C57.13-2008)

Authorized licensed use limited to: Stanford University. Downloaded on October 08,2016 at 10:09:35 UTC from IEEE Xplore. Restrictions apply.

IEEE Std C57.13™-2016

(Revision of

IEEE Std C57.13-2008)

IEEE Standard Requirements for

Instrument Transformers

Sponsor

Transformers Committee

of the

IEEE Power and Energy Society

Approved 29 January 2016

IEEE-SA Standards Board

Authorized licensed use limited to: Stanford University. Downloaded on October 08,2016 at 10:09:35 UTC from IEEE Xplore. Restrictions apply.

Abstract: Electrical, dimensional, and mechanical characteristics are covered, taking into

consideration certain safety features, for current and inductively coupled voltage transformers of

types generally used in the measurement of electricity and the control of equipment associated

with the generation, transmission, and distribution of alternating current. The aim is to provide a

basis for performance and interchangeability of equipment covered and to assist in the proper

selection of such equipment. Safety precautions are also addressed. Accuracy classes for

metering service are provided. The test code covers measurement and calculation of ratio and

phase angle, demagnetization, impedance and excitation measurements, polarity determination,

resistance measurements, short-time characteristics, temperature rise tests, dielectric tests, and

measurement of open-circuit voltage of current transformers.

Keywords: accuracy, current transformer, IEEE C57.13™, instrument transformer, primary

winding, rated secondary voltage, routine tests, secondary winding, type tests, voltage

transformer

•

The Institute of Electrical and Electronics Engineers, Inc.

3 Park Avenue, New York, NY 10016-5997, USA

IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics

Engineers, Incorporated.

PDF: ISBN 978-1-5044-2029-7 STD20943

Print: ISBN 978-1-5044-2030-3 STDPD20943

IEEE prohibits discrimination, harassment, and bullying.

For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.

No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission

of the publisher.

Authorized licensed use limited to: Stanford University. Downloaded on October 08,2016 at 10:09:35 UTC from IEEE Xplore. Restrictions apply.

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

IEEE Std C57.13-2016 是由电气与电子工程师协会（IEEE）发布的关于互感器（包括电流互感器和电压互感器）的行业标准，全称为“IEEE Standard Requirements for Instrument Transformers”。该标准详细规定了用于电力测量、保护和控制系统的互感器的电气性能、机械结构、绝缘等级、准确度要求、温升限制以及测试方法。通过遵守该标准，工程师和制造商能够确保互感器在额定频率及特定工况下具备可靠且一致的性能，从而提升电力系统的安全性与互操作性。无

展开>> 收起<<

IEEE Std C57.13-2016.pdf

共96页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

IEEE Std C57.13-2016

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: