SAE AS5864A-2015

VIP免费
Carl 2024-09-07 42 492.32KB 6 页 18星币
侵权投诉
AEROSPACE STANDARD
FITTING END, BULKHEAD, 24° CONE, FLARELESS,
FLUID CONNECTION, DESIGN STANDARD
AS5864
Copyright 2015 SAE International
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of SAE.
TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA)
Fax: 724-776-0790 Email: CustomerService@sae.org SAE WEB ADDRESS: http://www.sae.org
ISSUED 2006-06 REAFFIRMED 2013-01 REVISED 2015-12
THIRD ANGLE PROJECTION
CUSTODIAN: G-3/G-3B
REV.
A
AS5864
SHEET
1 OF 6
REV.
A
PROCUREMENT SPECIFICATION: NONE /1/
SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely
voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”
SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.
SAE values your input. To provide feedback
on this Technical Report, please visit
http://www.sae.org/technical/standards/AS5864A
RATIONALE
MAIN GRAPHIC MODIFIED TO CLARIFY LOCATION OF DIM J AND DIM BB.
FIGURE 1 - FITTING END DESIGN, STYLE G
A
C
H
TOL W
FF
A A
2 X 45° ±5°
SEALING
SURFACE
( Ø C ) Ø Y 24°
Ø CC
47 Ø .002 A
A
T
A
R .005 - .020
R .005 - .020
.005 A
Ø G Ø A
BB MAX
L /2/
R
STYLE G
Ø J
VIEW A
ENLARGED
TUBE STOP
Downloaded from SAE International by Univ of Toronto, Tuesday, May 03, 2022
AEROSPACE STANDARD
AS5864
SHEET 2 OF 6
REV.
A
FITTING END, BULKHEAD, 24° CONE, FLARELESS,
FLUID CONNECTION, DESIGN STANDARD
FIGURE 2 - FITTING END DESIGN, STYLE H
SAME AS STYLE G, EXCEPT AS SHOWN
FIGURE 3 - FITTING END DESIGN, STYLE J
SAME AS STYLE H, EXCEPT AS SHOWN
Downloaded from SAE International by Univ of Toronto, Tuesday, May 03, 2022
AEROSPACE STANDARD
AS5864
SHEET 3 OF 6
REV.
A
FITTING END, BULKHEAD, 24° CONE, FLARELESS,
FLUID CONNECTION, DESIGN STANDARD
FIGURE 4 - FITTING END DESIGN, STYLE S
SAME AS STYLE G, EXCEPT AS SHOWN
STYLE S IS PROVIDED FOR USE WITH FITTINGS
WHICH REQUIRED AS4377 STYLE S BUT THAT HAVE
BEEN REVISED TO SPECIFY AS5864 STYLE S
STYLE S IS INACTIVE FOR NEW DESIGN
FIGURE 5 - FITTING END DESIGN, STYLE E
SAME AS STYLE H EXCEPT AS SHOWN
STYLE E IS PROVIDED FOR USE WITH FITTINGS
WHICH REQUIRED AS4377 STYLE E BUT THAT
HAVE BEEN REVISED TO SPECIFY AS5864 STYLE E
STYLE E IS INACTIVE FOR NEW DESIGN
Downloaded from SAE International by Univ of Toronto, Tuesday, May 03, 2022
摘要：

SAE AS5864A-2015 是由 SAE International 发布的航空航天高性能圆形电连接器标准规范，取代早期版本，旨在统一并更新与 MIL-DTL-38999 系列连接器相关的设计要求、材料规范、测试方法与验收标准。该标准涵盖了连接器的结构特性、电气性能、机械耐久性、环境适应性及屏蔽效能等关键参数，适用于航空航天、军事及高可靠性工业领域的连接系统。文档详细规定了连接器外壳、绝缘体、接触件、密封件及锁紧机构的设计原则，并针对温度范围、振动、冲击、盐雾及电磁干扰提出了严苛的测试条件

展开>> 收起<<
SAE AS5864A-2015.pdf

共6页,预览4页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：Carl 分类：国外协会 价格：18星币 属性：6 页 大小：492.32KB 格式：PDF 时间：2024-09-07

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 6
评分 收藏
分享
立即下载 VIP免费下载
客服
关注