SAE AMS-STD-753B-2017

VIP专免

Carl 2024-09-07 46 1.55MB 10 页 20星币

__________________________________________________________________________________________________________________________________________

SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is

entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”

SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and

suggestions.

recording, or otherwise, without the prior written permission of SAE.

TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)

Tel: +1 724-776-4970 (outside USA)

Fax: 724-776-0790

Email: CustomerService@sae.org

SAE WEB ADDRESS: http://www.sae.org

SAE values your input. To provide feedback on this

Technical Report, please visit

http://standards.sae.org/AMSSTD753B

AEROSPACE

MATERIAL SPECIFICATION

AMS-STD-753™

REV. B

Issued 1998-07

Noncurrent 2006-05

Reaf. Nonc. 2012-04

Stabilized 2017-04

Superseding AMS-STD-753A

Corrosion-Resistant Steel Parts:

Sampling, Inspection and Testing

for Surface Passivation

RATIONALE

AMS-STD-753B stabilizes this document because it contains mature technology that is not expected to change and thus

no further revisions are anticipated.

STABILIZED NOTICE

AMS-STD-753B has been declared "STABILIZED" by the SAE AMS F Corrosion Heat Resistant Alloys Committee. This

document was stabilized because this document contains mature technology that is not expected to change and thus no

further revisions are anticipated. Previously this document was non-current. This document has never been technically

updated. Users of this document should refer to the cognizant engineering organization for disposition of any issues with

reports/certifications to this specification; including exceptions listed on the certification.

NOTE: In many cases, the purchaser may represent a sub tier supplier and not the cognizant engineering organization.

Downloaded from SAE International by Univ of Toronto, Tuesday, March 01, 2022

SAE INTERNATIONAL

AMS-STD-753™B

2 OF 10

Downloaded from SAE International by Univ of Toronto, Tuesday, March 01, 2022

SAE INTERNATIONAL

AMS-STD-753™B

3 OF 10

Downloaded from SAE International by Univ of Toronto, Tuesday, March 01, 2022

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

SAE AMS-STD-753B-2017是一项由SAE International发布的航空航天材料规范标准，主要针对碳纤维、玻璃纤维及芳纶纤维增强复合材料层压板的边角切割与修整工艺。该标准替代了原有的SAMPE标准，并于2017年更新为B版本，旨在统一并优化复合材料在航空航天制造中的机械加工流程。文档详细规定了切割工具类型、冷却润滑要求、切割速度与进给率参数，以及毛刺、分层、热损伤等缺陷的验收标准。适用于飞机构件、卫星结构件及发动机罩等关键部件的制造与修复环节。遵循本标准可有效减少复合材料加

展开>> 收起<<

SAE AMS-STD-753B-2017.pdf

共10页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

SAE AMS-STD-753B-2017

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: