PIP VESV1002-2019

VIP专享

Carl 2024-09-16 31 297.5KB 44 页 18星币

侵权投诉

COMPLETE REVISION

January 2019

Vessels

PIP VESV1002

Design and Fabrication Specification for Vessels

ASME Code Section VIII, Divisions 1 and 2

PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES

In an effort to minimize the cost of process industry facilities, this Practice has been

prepared from the technical requirements in the existing standards of major industrial users,

contractors, or standards organizations. By harmonizing these technical requirements into a

single set of Practices, administrative, application, and engineering costs to both the

purchaser and the manufacturer should be reduced. While this Practice is expected to

incorporate the majority of requirements of most users, individual applications may involve

requirements that will be appended to and take precedence over this Practice. Determinations

concerning fitness for purpose and particular matters or application of the Practice to

particular project or engineering situations should not be made solely on information

contained in these materials. The use of trade names from time to time should not be viewed

as an expression of preference but rather recognized as normal usage in the trade. Other

brands having the same specifications are equally correct and may be substituted for those

named. All Practices or guidelines are intended to be consistent with applicable laws and

regulations including OSHA requirements. To the extent these Practices or guidelines should

conflict with OSHA or other applicable laws or regulations, such laws or regulations must be

followed. Consult an appropriate professional before applying or acting on any material

contained in or suggested by the Practice.

This Practice is subject to revision at any time.

Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies and

Subscribers may copy this Practice for their internal use. Changes or modifications of any kind

are not permitted within any PIP Practice without the express written authorization of PIP.

Authorized Users may attach addenda or overlays to clearly indicate modifications or

exceptions to specific sections of PIP Practices. Authorized Users may provide their clients,

suppliers and contractors with copies of the Practice solely for Authorized Users’ purposes.

These purposes include but are not limited to the procurement process (e.g., as attachments to

requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and

issue of design engineering deliverables for use on a specific project by Authorized User’s

client. PIP’s copyright notices must be clearly indicated and unequivocally incorporated in

documents where an Authorized User desires to provide any third party with copies of the

Practice.

PUBLISHING HISTORY

September 1997

Issued

May 2009

Editorial Revision

December 1998

Technical Revision

March 2012

Complete Revision

February 2007

Complete Revision

January 2019

Complete Revision

Not printed with State funds

COMPLETE REVISION

January 2019

Vessels

Process Industry Practices Page 1 of 42

PIP VESV1002

Design and Fabrication Specification for Vessels

ASME Code Section VIII, Divisions 1 and 2

Table of Contents

1. Scope ............................................. 2

2. References .................................... 2

2.1 Process Industry Practices ................... 2

2.2 Industry Codes and Standards ............. 2

2.3 Government Regulations ...................... 3

2.4 Other References .................................. 4

3. Definitions ..................................... 4

4. Requirements ................................ 5

4.1 General ................................................. 5

4.2 Design ................................................... 6

4.3 Materials .............................................. 23

4.4 Fabrication .......................................... 24

4.5 Examination, Inspection and Pressure

Testing ................................................ 33

4.6 Preparation for Shipment .................... 38

Appendix A: Equivalent Pressure Formulas for

Bending Moment and Axial Tensile Load ......... 41

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载

摘要：

PIP VESV1002-2019 是由美国管道行业协会（PIP，Process Industry Practices）发布的一项关于阀门工程规范的标准文档，主要针对工业管道系统中阀门的选型、设计、材料、测试及安装要求进行详细规定。该标准适用于石油、化工、天然气等流程工业领域，旨在提升阀门系统的可靠性、安全性和互换性，减少项目执行中的技术冲突与成本浪费。PIP VESV1002-2019 在2019年进行了更新，涵盖闸阀、截止阀、止回阀、球阀等常见阀型的技术参数与验收标准，是工程设计、采购、施工

展开>> 收起<<

PIP VESV1002-2019.pdf

共44页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

PIP VESV1002-2019

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: