BS EN ISO 683-7-2024 热处理钢、合金钢和易切削钢第7部分：非合金钢和合金钢光亮产品

VIP专享
乔大爷开音响 2025-03-31 55 1.58MB 64 页 20星币
侵权投诉
BSI Standards Publication
Heat-treatable steels, alloy steels
and free-cutting steels
Part 7: Bright products of non-alloy and alloy steels
BS EN ISO 683-7:2024
Incorporating corrigendum October 2024
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN ISO 683-7
October 2024
ICS 77.140.10; 77.140.20; 77.140.45 Supersedes EN 10277:2018
English Version
Heat-treatable steels, alloy steels and free-cutting steels -
Part 7: Bright products of non-alloy and alloy steels (ISO
683-7:2023)
Aciers pour traitement thermique, aciers alliés et
aciers pour décolletage - Partie 7: Produits en aciers
non alliés et alliés transformés à froid (ISO 683-
7:2023)
Für eine Wärmebehandlung bestimmte Stähle, legierte
Stähle und Automatenstähle - Teil 7:
Blankstahlerzeugnisse aus unlegierten und legierten
Stählen (ISO 683-7:2023)
This European Standard was approved by CEN on 13 October 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN ISO 683-7:2024 E
National foreword
This British Standard is the UK implementation of EN ISO 683‑7:2024.
It is identical to ISO 683‑7:2023. It supersedes BS ISO 683‑7:2023, which
is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee ISE/105, Steels for Heat Treatment, Alloy Steels, Free‑Cutting
Steels and Stainless Steels.
A list of organizations represented on this committee can be obtained on
request to its committee manager.
Contractual and legal considerations
This publication has been prepared in good faith, however no
representation, warranty, assurance or undertaking (express or
implied) is or will be made, and no responsibility or liability is or will be
accepted by BSI in relation to the adequacy, accuracy, completeness or
reasonableness of this publication. All and any such responsibility and
liability is expressly disclaimed to the full extent permitted by the law.
This publication is provided as is, and is to be used at the
recipient’s own risk.
The recipient is advised to consider seeking professional guidance with
respect to its use of this publication.
This publication is not intended to constitute a contract. Users are
responsible for its correct application.
© The British Standards Institution 2024
Published by BSI Standards Limited 2024
ISBN 978 0 539 31519 6
ICS 77.140.10; 77.140.20; 77.140.45
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 30 November 2023.
Amendments/corrigenda issued since publication
Date Text affected
31 October 2024 This corrigendum renumbers BS ISO 683‑7:2023 as
BS EN ISO 683‑7:2024
BRITISH STANDARD
BS EN ISO 683‑7:2024
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN ISO 683-7
October 2024
ICS 77.140.10; 77.140.20; 77.140.45 Supersedes EN 10277:2018
English Version
Heat-treatable steels, alloy steels and free-cutting steels -
Part 7: Bright products of non-alloy and alloy steels (ISO
683-7:2023)
Aciers pour traitement thermique, aciers alliés et
aciers pour décolletage - Partie 7: Produits en aciers
non alliés et alliés transformés à froid (ISO 683-
7:2023)
Für eine Wärmebehandlung bestimmte Stähle, legierte
Stähle und Automatenstähle - Teil 7:
Blankstahlerzeugnisse aus unlegierten und legierten
Stählen (ISO 683-7:2023)
This European Standard was approved by CEN on 13 October 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN ISO 683-7:2024 E
BS EN ISO 683‑7:2024

标签： #ISO #合金钢 #钢

摘要：

本页面提供关于 BS EN ISO 683-7-2024 标准文档的全面解读，该标准是热处理钢、合金钢和易切削钢系列规范的第7部分，专门针对非合金钢和合金钢光亮产品的技术要求和交货条件。该标准涵盖了经过冷拔、剥皮、磨光等表面处理工艺获得的精密尺寸钢材，明确了其化学成分、硬度范围、淬透性等级及机械性能指标，适用于汽车、机械制造、精密仪器等行业对高表面质量和尺寸精度有严格要求的应用场景。通过本页面，用户可以快速了解该标准与旧版差异、适用范围以及如何选择符合规范的光亮钢材，从而确保采购与生产中的材料合

展开>> 收起<<
BS EN ISO 683-7-2024 热处理钢、合金钢和易切削钢第7部分：非合金钢和合金钢光亮产品.pdf

共64页,预览3页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：乔大爷开音响 分类：国际标准 价格：20星币 属性：64 页 大小：1.58MB 格式：PDF 时间：2025-03-31

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 64
评分 收藏
分享
立即下载
客服
关注