美军标 MIL-DTL-10382E-2026 食品处理机械和设备用喷涂凡士林防腐详细规范

VIP专享

小飞侠Robben 2026-09-28 18 228.01KB 10 页 26星币

侵权投诉

INCH-POUND

MIL-DTL-10382E

8 JUNE 2026 .

SUPERSEDING

MIL-C-10382D

6 October 1983

DETAIL SPECIFICATION

CORROSION PREVENTIVE, PETROLATUM, SPRAYING APPLICATION:

FOR FOOD HANDLING MACHINERY AND EQUIPMENT

REACTIVATED AFTER 8 JUNE 2026 AND MAY BE USED

FOR NEW AND EXISTING DESIGN AND ACQUISITIONS.

This specification is approved for use by the Department of the Army and is available for use by

all Departments and Agencies of the Department of Defense.

1. SCOPE

1.1 Scope. This specification covers one grade of petroleum base corrosion preventive suitable

for use by spraying application on food handling machinery and equipment.

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3 and 4 of this

specification. This section does not include documents cited in other sections of this specification

or recommended for additional information or as examples. While every effort has been made to

ensure the completeness of this list, document users are cautioned that they must meet all specified

requirements of documents cited in sections 3 and 4 of this specification, whether or not they are

listed.

Comments, suggestions, or questions on this document should be addressed to: Director, U.S.

Army DEVCOM, Army Research Laboratory, Army Research Directorate, Specifications and

Standards Office, Attn: FCDD-RLA-M, Aberdeen Proving Ground, MD 21005-5069. Since

contact information can change, you may want to verify the currency of this address

information using the ASSIST Online database at https://assist.dla.mil/.

AMSC N/A FSC 8030

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

MIL-DTL-10382E

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and

handbooks form a part of this document to the extent specified herein. Unless otherwise specified,

the issues of these documents are those cited in the contract or purchase order.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-PRF-680 - Degreasing Solvent

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-129 - Marking for Shipment and Storage

MIL-STD-1916 - DoD Preferred Methods for Acceptance of Product

(Copies of this document are available online at https://quicksearch.dla.mil/.)

2.2.2 Other Government documents, drawings, and publications. The following other Government

documents, drawings, and publications form a part of this document to the extent specified herein.

Unless otherwise specified, the issues of these documents are those cited in the solicitation or

contract.

FEDERAL SPECIFICATIONS

PPP-C-96 - Cans, Metal, 28 Gage and Lighter

PPP-D-729 - Drums, Shipping and Storage, Steel, 55-Gallon (208 Liters)

PPP-P-704 - Pails, Metal: (Shipping, Steel, 1 Through 12 Gallons)

FEDERAL STANDARDS

FED-STD-123 - Marking for Shipment (Civil Agencies)

FED-STD-791 - Testing Method of Lubricants, Liquid Fuels, and Related

Products

(Copies of this document are available online at https://quicksearch.dla.mil/.)

2.3 Non-Government publications. The following documents form a part of this specification to

the extent specified herein. Unless otherwise specified, the issues of these documents are those

cited in the contract or purchase order.

THE AMERICAN NATIONAL STANDARDS INSTITUTE

ANSI/ASQ Z1.4 - Sampling Procedures and Tables for Inspection by Attributes

(Copies of this document are available online at https://ansi.org/.)

MIL-DTL-10382E

ASTM INTERNATIONAL

ASTM-A109/A109M - Steel, Strip, Carbon, (0.25 Maximum Percent), Cold-Rolled

ASTM B117 - Salt Spray (Fog) Apparatus, Operating

ASTM D93 - Cup Tester, Closed, Flash Point by Pensky-Martens

ASTM D127 - Standard Test Method for Drop Melting Point of Petroleum

Wax, Including Petrolatum

ASTM D2500 - Petroleum Products, Cloud Point of

ASTM D3951 - Packaging, Commercial

ASTM D4057 - Petroleum and Petroleum Products, Manual Sampling of

(Copies of these documents are available online at https://www.astm.org/.)

2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict

between the text of this document and the references cited herein, the text of this document takes

precedence. Nothing in this document, however, supersedes applicable laws and regulations

unless a specific exemption has been obtained.

3. REQUIREMENTS

3.1 Material. The corrosion preventive covered by this specification shall be a smooth, uniform

mixture of such materials that the resulting compound shall conform to the requirements of this

specification. The compound shall be dispersed in the solvent for ready application by spraying

at room temperature and shall produce a thin, easily removable film upon drying (see 6,2). The

material shall contain no compounds or any combination of materials, which might prove

hazardous under the usages recommended by the manufacturer. The residual material after

evaporation shall be harmless if inadvertently ingested by personnel.

3.2 Composition. The compound shall conform to the composition specified in table I.

TABLE I. Composition.

Ingredients Percent by Weight

Petrolatum, white, U.S.P.

Microcrystalline wax, white 31.0 ± 1.0

Lanolin, U.S.P. 10.5 ± 0.5

1-hydroxyethyl-2-heptadecenyl

imidazoline 0.5 ± 0.05

2-amino-2-methyl-1-propanol 0.5 ± 0.05

Dry cleaning solvent

MIL-PRF-680: Type IV or V To make 100%

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载

标签： #机械

摘要：

MIL-DTL-10382E-2026《食品处理机械和设备用喷涂凡士林防腐详细规范》是美国军用详细规范，主要规定食品处理机械和设备用喷涂凡士林防腐材料的技术要求、质量保证、试验方法、包装标识及验收规则，适用于食品加工、处理、包装和运输等可能接触或邻近食品的机械设备；该标准可帮助采购、制造、质检和合规人员确认喷涂凡士林在防腐性、附着力、安全性及操作适用性方面是否满足 MIL-DTL-10382E-2026 要求，并可用于检索标准版本、替代关系、技术参数和军用标准合规信息。

展开>> 收起<<

美军标 MIL-DTL-10382E-2026 食品处理机械和设备用喷涂凡士林防腐详细规范.pdf

共10页,预览3页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

美军标 MIL-DTL-10382E-2026 食品处理机械和设备用喷涂凡士林防腐详细规范

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: