BS EN 10028-7-2016 (2018)

VIP免费
阿拉丁 2024-09-16 23 1007.5KB 58 页 12星币
侵权投诉
BSI Standards Publication
WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06
Flat products made of steels for pressure purposes
Part 7: Stainless steels
BS EN 10028‑7:2016
Incorporating corrigendum June 2018
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 10028-7
July 2016
ICS 77.140.30; 77.140.50
Supersedes EN 10028-7:2007
English Version
Flat products made of steels for pressure purposes -Part
7: Stainless steels
Produits plats en aciers pour appareils à pression -
Partie 7: Aciers inoxydables
Flacherzeugnisse aus Druckbehälterstählen -Teil 7:
Nichtrostende Stähle
This European Standard was approved by CEN on 15 April 2016.
This European Standard was corrected and reissued by the CEN
-CENELEC Management Centre on 2016-07-27.
CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references
concerning such national standards may be obtained on applicati
on to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German).
A version in any other language made by
translation under the responsibility of a
CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav
Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom
.
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN
All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 10028-7:2016 E
National foreword
This British Standard is the UK implementation of EN 10028‑7:2016. It
supersedes BS EN 10028‑7:2007, which is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee ISE/107, Steels for Pressure Purposes.
A list of organizations represented on this committee can be obtained on
request to its secretary.
This publication does not purport to include all the necessary provisions
of a contract. Users are responsible for its correct application.
© The British Standards Institution 2018
Published by BSI Standards Limited 2018
ISBN 978 0 539 01413 6
ICS 77.140.30; 77.140.20; 77.140. 50
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 31 July 2016.
Amendments/corrigenda issued since publication
Date Text affected
30 June 2018 Implementation of CEN correction notice 27 July
2016: deletion of third paragraph in European
foreword
30 June 2018 Implementation of CEN correction notice 27 July
2016: replacement of Introduction
BRITISH STANDARD
BS EN 10028‑7:2016
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 10028-7
July 2016
ICS 77.140.30; 77.140.50
Supersedes EN 10028-7:2007
English Version
Flat products made of steels for pressure purposes - Part
7: Stainless steels
Produits plats en aciers pour appareils à pression -
Partie 7: Aciers inoxydables
Flacherzeugnisse aus Druckbehälterstählen - Teil 7:
Nichtrostende Stähle
This European Standard was approved by CEN on 15 April 2016.
This European Standard was corrected and reissued by the CEN
-CENELEC Management Centre on 2016-07-27.
CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references
concerning such national standards may be obtained on applicati
on to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German).
A version in any other language made by
translation under the responsibility of a
CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav
Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom
.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN
All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 10028-7:2016 E
BS EN 10028‑7:2016
摘要：

BS EN 10028-7-2016 (2018) 是欧洲标准化委员会发布的关于压力容器用不锈钢扁平钢板的规范标准，涵盖耐热钢、奥氏体、铁素体及马氏体不锈钢等材料的技术要求、力学性能、检验与验收条件。该标准适用于焊接压力容器的制造，明确了钢板的化学成分、热处理状态、冲击韧性及尺寸公差等关键参数，是工程设计、材料采购与质量检验的核心依据。其2018年更新的版本进一步修正了部分牌号的性能指标，强化了与ISO标准的一致性，提升了对高温高压环境下材料可靠性的保障。对于从事压力容器设计、金属材料采购或国际

展开>> 收起<<
BS EN 10028-7-2016 (2018).pdf

共58页,预览4页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：阿拉丁 分类：国际标准 价格：12星币 属性：58 页 大小：1007.5KB 格式：PDF 时间：2024-09-16

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 58
评分 收藏
分享
立即下载 VIP免费下载
客服
关注