BS EN 10216-4-2013

VIP免费

阿拉丁 2024-09-16 13 1.2MB 34 页 12星币

侵权投诉

BSI Standards Publication

BS EN 10216-4:2013

Seamless steel tubes for

pressure purposes — Technical

delivery conditions

Part 4: Non-alloy and alloy steel tubes with

specified low temperature properties

BS EN 10216-4:2013 BRITISH STANDARD

National foreword

This British Standard is the UK implementation of EN 10216-4:2013.

It supersedes BS EN 10216-4:2002 which is withdrawn.

The UK participation in its preparation was entrusted to Technical

Committee ISE/110, Steel Tubes, and Iron and Steel Fittings.

A list of organizations represented on this committee can be

obtained on request to its secretary.

This publication does not purport to include all the necessary

provisions of a contract. Users are responsible for its correct

application.

Limited 2013

ISBN 978 0 580 68643 6

ICS 23.040.10; 77.140.75

Compliance with a British Standard cannot confer immunity from

legal obligations.

This British Standard was published under the authority of the

Standards Policy and Strategy Committee on 31 December 2013.

Amendments issued since publication

Date Text affected

BS EN 10216-4:2013

EUROPEAN STANDARD

NORME EUROPÉENNE

EUROPÄISCHE NORM

EN 10216-4

December 2013

ICS 23.040.10; 77.140.75 Supersedes EN 10216-4:2002

English Version

Seamless steel tubes for pressure purposes - Technical delivery

conditions - Part 4: Non-alloy and alloy steel tubes with specified

low temperature properties

Tubes sans soudure en acier pour service sous pression -

Conditions techniques de livraison - Partie 4 : Tubes en

acier non allié et allié avec caractéristiques spécifiées à

basse température

Nahtlose Stahlrohre für Druckbeanspruchungen -

Technische Lieferbedingungen - Teil 4: Rohre aus

unlegierten und legierten Stählen mit festgelegten

Eigenschaften bei tiefen Temperaturen

This European Standard was approved by CEN on 17 August 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same

status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

ll rights of exploitation in any form and by any means reserved

worldwide for CEN national Members.

Ref. No. EN 10216-4:2013 E

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

亲，本站95%以上的标准规范都面向会员免费，办理VIP会员下载更省钱，平均每篇不到2元

立即下载 VIP免费下载

摘要：

BS EN 10216-4-2013 是欧洲标准规范，规定了用于压力用途的非合金和合金钢无缝钢管的技术交货条件，特别针对含有低温环境应用的铁素体合金钢。该标准替代了旧版 BS EN 10216-4:2002，涵盖了管材的化学成分、力学性能、热处理状态、无损检测及尺寸公差等关键要求，广泛应用于石油、化工、锅炉及低温压力容器等对材料韧性和抗脆断性能要求严格的领域。遵守该标准有助于确保管道系统在低温工况下的安全性和可靠性，是工程采购、质量检验及国际贸易中的重要参考依据。

展开>> 收起<<

BS EN 10216-4-2013.pdf

共34页,预览4页

还剩页未读，继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

BS EN 10216-4-2013

相关推荐

开通VIP享超值会员特权

相关内容

热门标签

举报选择: