BS EN 10283-2019

VIP免费
阿拉丁 2024-09-16 28 672.42KB 24 页 16星币
侵权投诉
BSI Standards Publication
WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06
Corrosion resistant steel castings
BS EN 10283:2019
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 10283
March 2019
ICS 77.140.20; 77.140.80 Supersedes EN 10283:2010
English Version
Corrosion resistant steel castings
Aciers moulés résistant à la corrosion Korrosionsbeständiger Stahlguss
This European Standard was approved by CEN on 14 December 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 10283:2019 E
National foreword
This British Standard is the UK implementation of EN 10283:2019. It
supersedes BS EN 10283:2010, which is withdrawn.
The UK participation in its preparation was entrusted to Technical
Committee ISE/111, Steel Castings and Forgings.
A list of organizations represented on this committee can be obtained on
request to its secretary.
This publication does not purport to include all the necessary provisions
of a contract. Users are responsible for its correct application.
© The British Standards Institution 2019
Published by BSI Standards Limited 2019
ISBN 978 0 580 52035 8
ICS 77.140.20; 77.140.80
Compliance with a British Standard cannot confer immunity from
legal obligations.
This British Standard was published under the authority of the
Standards Policy and Strategy Committee on 30 April 2019.
Amendments/corrigenda issued since publication
Date Text affected
BRITISH STANDARD
BS EN 10283:2019
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 10283
March 2019
ICS 77.140.20; 77.140.80 Supersedes EN 10283:2010
English Version
Corrosion resistant steel castings
Aciers moulés résistant à la corrosion Korrosionsbeständiger Stahlguss
This European Standard was approved by CEN on 14 December 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 10283:2019 E
BS EN 10283:2019
摘要：

BS EN 10283-2019 是欧洲标准化委员会发布的一项关于耐腐蚀钢铸件的标准规范，取代了早期版本。该标准详细规定了用于一般工程用途的耐腐蚀钢铸件的化学成分、力学性能、热处理条件以及验收要求，适用于多种腐蚀性环境下的工业应用，如化工、石油、海洋工程等领域。文档涵盖了包括马氏体、奥氏体和铁素体-奥氏体双相不锈钢在内的多种钢种牌号，并提供了相应的试验方法和质量控制指南。遵循该标准有助于确保铸件材料在耐腐蚀性、强度、韧性等方面达到一致性和可靠性，对于从事铸造、材料选择及质量检验的专业人员具有重要

展开>> 收起<<
BS EN 10283-2019.pdf

共24页,预览4页

还剩页未读， 继续阅读

声明：本文档系会员上传，若文档所含内容侵犯了您的版权或隐私，请立即通知，我们立即给予侵权申诉删除！

相关推荐

更多
立即下载
作者：阿拉丁 分类：国际标准 价格：16星币 属性：24 页 大小：672.42KB 格式：PDF 时间：2024-09-16

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务

相关内容

更多

热门标签

ISO 混凝土 技术规范 检验 航空航天 不锈钢 消防 压力容器 铝合金 法兰
/ 24
评分 收藏
分享
立即下载 VIP免费下载
客服
关注