BS EN 14546-2005

VIP免费
阿拉丁 2024-09-16 8 246.04KB 16 页 12星币
侵权投诉
BRITISH STANDARD BS EN
14546:2005
Foodstuffs —
Determination of trace
elements —
Determination of total
arsenic by hydride
generation atomic
absorption
spectrometry (HGAAS)
after dry ashing
The European Standard EN 14546:2005 has the status of a
British Standard
ICS 67.050
12&23<,1*:,7+287%6,3(50,66,21(;&(37$63(50,77('%<&23<5,*+7/$:
BS EN 14546:2005
This British Standard was
published under the authority
of the Standards Policy and
Strategy Committee on
16 May 2005
© BSI 16 May 2005
ISBN 0 580 46011 8
National foreword
This British Standard is the official English language version of
EN 14546:2005.
The UK participation in its preparation was entrusted to Technical Committee
AW/-/3, Food analysis — Horizontal methods, which has the responsibility to:
A list of organizations represented on this committee can be obtained on
request to its secretary.
Cross-references
The British Standards which implement international or European
publications referred to in this document may be found in the BSI Catalogue
under the section entitled “International Standards Correspondence Index”, or
by using the “Search” facility of the BSI Electronic Catalogue or of
British Standards Online.
This publication does not purport to include all the necessary provisions of a
contract. Users are responsible for its correct application.
Compliance with a British Standard does not of itself confer immunity
from legal obligations.
— aid enquirers to understand the text;
— present to the responsible international/European committee any
enquiries on the interpretation, or proposals for change, and keep the
UK interests informed;
— monitor related international and European developments and
promulgate them in the UK.
Summary of pages
This document comprises a front cover, an inside front cover, the EN title page,
pages 2 to 12, an inside back cover and a back cover.
The BSI copyright notice displayed in this document indicates when the
document was last issued.
Amendments issued since publication
Amd. No. Date Comments
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 14546
April 2005
ICS 67.050
English version
Foodstuffs - Determination of trace elements - Determination of
total arsenic by hydride generation atomic absorption
spectrometry (HGAAS) after dry ashing
Produits alimentaires - Détermination des éléments traces -
Détermination de l'arsenic total par spectrométrie
d'absorption atomique par génération d'hydrures (SAAGH)
après calcination par voie sèche
Lebensmittel - Bestimmung von Elementspuren -
Bestimmung von Gesamtarsen mit
Atomabsorptionsspektrometrie-Hydridtechnik (HGAAS)
nach Trockenveraschung
This European Standard was approved by CEN on 15 March 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members. Ref. No. EN 14546:2005: E
摘要:

BS EN 14546-2005是关于铁素体不锈钢的技术标准规范,由英国标准协会采纳欧洲标准EN 14546-2005发布。该标准主要规定了铁素体不锈钢的化学成分、力学性能、制造工艺以及检测方法,适用于各种工业领域中对耐腐蚀性和抗氧化性有较高要求的金属材料应用。该标准帮助制造商、工程师和质检人员确保产品符合统一的质量与安全要求,增强了材料在不同市场上的兼容性和互用性。BS EN 14546-2005广泛应用于化工、能源、建筑及食品加工等行业的设备制造与材料选型,是国际不锈钢相关标准体系中的重要组

展开>> 收起<<
BS EN 14546-2005.pdf

共16页,预览4页

还剩页未读, 继续阅读

声明:本文档系会员上传,若文档所含内容侵犯了您的版权或隐私,请立即通知,我们立即给予侵权申诉删除!
作者:阿拉丁 分类:国际标准 价格:12星币 属性:16 页 大小:246.04KB 格式:PDF 时间:2024-09-16

开通VIP享超值会员特权

  • 多端同步记录
  • 高速下载文档
  • 免费文档工具
  • 分享文档赚钱
  • 每日登录抽奖
  • 优质衍生服务
/ 16
客服
关注